Ta yaya tanderun yanayi ke kula da kwanciyar hankali a cikin tanderun?

Don sarrafa yanayin da ke cikin tanderun da kuma kula da matsa lamba a cikin tanderun, dole ne a ware wurin aiki a cikin tanderun daga iska ta waje, kuma ya kamata a kauce wa zubar da iska da iska kamar yadda zai yiwu. Sabili da haka, duk sassan haɗin waje kamar harsashi na tanderu, tsarin masonry, ƙofar tanderun da fan, thermocouple, bututu mai haske, mai ciyar da turawa, da sauransu ana buƙatar amfani da na’urorin rufewa; don kiyaye mafi girman yuwuwar carbon a cikin tanderun, sai dai ban da sarrafa kwanciyar hankali na abun da ke ciki, yanayin tanderun kuma dole ne a sarrafa shi ta atomatik. Sabili da haka, ya zama dole don samar da kayan sarrafawa daban-daban don ci gaba da aunawa akai-akai da kuma daidaita iskar gas a cikin tanderun.

Don tabbatar da kwanciyar hankali na yanayi na tanderun yanayi, ana iya raba wutar lantarki zuwa nau’i biyu: murfi mai murfi kuma babu murfi. Wutar murhu tana waje da tanderun murfi, kuma kayan aikin yana mai zafi a kaikaice a cikin tanderun murfi. Bututu mai walƙiya na harshen wuta ko bututu mai haske na lantarki yana raba harshen wuta ko jikin dumama wutar lantarki daga iskar tanderun don gujewa kwanciyar hankali a cikin tanderun zobe da ya karye.

Haɗin rage yawan iskar gas da iska ya kai matsakaicin matsakaicin haɗuwa, kuma yana da sauƙi don haifar da fashewa a mafi girman zafin jiki. Sabili da haka, ɗakunan gaba da na baya, ɗakin quenching da jinkirin sanyaya ɗakin tanderun suna sanye take da na’urori masu hana fashewa. Har ila yau, an sanye shi da tsarin samar da iskar gas na tanderu da tsarin kula da hayaki, wanda ke buƙatar matakan tabbatar da fashewa.

murfi tanderu yana amfani da rage iskar gas. Don kada ya shafi rayuwar sabis na masonry kuma kada ya lalata yanayin wutar lantarki na al’ada, ana buƙatar jikin tanderun da za a yi da kayan da ke hana carbonization.

Tanderun yanayi iri-iri suna da babban buƙatun rufewa, kuma hadaddun ayyukan lodi da saukarwa suna buƙatar tanderu don dalilai da yawa. A cikin samarwa da yawa, sun ƙunshi babban haɗin haɗin gwiwar zafi da aka keɓe ko raka’a biyu-manufa, don haka ana buƙatar digiri mafi girma na injiniyoyi. digiri na atomatik.