Shirya matsala a cikin aiki na babban mitar shigar da hardening inji kayan aikin

Babban mitar shigar da kayan aikin hardening na’ura mai jujjuyawa: Akwai yanayi da yawa a gabaɗaya:

1. Inductor yana da gajeren kewayawa tsakanin juyi, kuma inductor inductance ya yi girma sosai.

2. Kwamitin kewayawa na kayan aiki yana da rigar.

3. Allon tuƙi ya karye.

4. Tsarin IGBT ya karye.

5. Laifi irin su wutan lantarki na haifar da cikas.

Babban mitar shigar da hardening inji kayan aikin wuce gona da iri:

1. Ƙarfin wutar lantarki yana da yawa (gaba ɗaya, wutar lantarki na masana’antu yana tsakanin 360-420V).

2. Wurin kewayawa na kayan aiki ya lalace (yana buƙatar maye gurbin Zener diode).

Matsaloli a cikin matsa lamba na hydraulic na babban mitar induction hardening inji kayan aikin:

1. Matsakaicin famfo na ruwa bai isa ba (shaft yana sawa saboda aikin dogon lokaci na famfo ruwa).

2. Ma’aunin ma’aunin ruwa ya karye.

Matsaloli a cikin zafin ruwa na babban mitar induction hardening inji kayan aikin:

1. Ruwan zafin jiki ya yi yawa (yawanci saita zafin jiki zuwa digiri 45).

2. An toshe bututun ruwan sanyi.

Asarar babban mitar induction hardening inji:

1. Layin mai shigowa mai matakai uku ya fita daga lokaci.

2. Rashin tsarin da’irar kariyar lokaci ya lalace.

Muna buƙatar bincika abubuwan da ke haifar da gazawa daban-daban da magance matsalolin don gyara kayan aiki cikin lokaci ba tare da jinkirta aikin ba.