Application fields of induction heating equipment

1. Hot heading of various high-strength bolts and nuts;

2. Ịkwanyụ ube dị iche iche, mkpanaka, na mkpanaka;

3. Quenching of various auto parts such as half shafts, leaf springs, shift forks, valves, rocker arms, ball pins, etc.

4. Quenching of various internal combustion engine parts and deceleration surface parts.

5. Ịkụcha ngwa ọrụ aka dị iche iche dị ka ngwa, mma, mkpa, anyụike, hama, wdg.

6. ịgbado ọkụ nke dị iche iche diamond mejupụtara malite ịgba ibe n’ibe;

7. ịgbado ọkụ nke dị iche iche ike alloy cutter isi na hụrụ pupụtara;

8. All kinds of picks, drill bits, drill pipes, coal drill bits, air drill bits and other mines.

Ọkpụkpụ diathermic

1. Isi ọkụ dị n’akụkụ akụkụ ọkọlọtọ dị iche iche, ihe njigide, bolts na mkpụrụ osisi dị ike dị iche iche;

2. Diathermic forging of bars within 800mm in diameter;

3. Hot heading and hot rolling of mechanical parts, hardware tools, and straight shank twist drills

Na-ada ada

1. Ịchacha igwe dị iche iche, mkpị na mkpanaka;

2. Ịkụcha okirikiri ọkara dị iche iche, isi mmiri akwụkwọ, ndụdụ mgbagharị, valvụ, ogwe aka rocker, mkpọ bọọlụ na ngwa ụgbọ ala na ọgba tum tum ndị ọzọ.

3. Ịgbanyụ akụkụ ihe ọkụ ọkụ dị n’ime dị iche iche na akụkụ imebi umeala;

4. Ịkwụsị ịkwa akwa akwa akwa akwa igwe na ụlọ ọrụ ngwa igwe (lathes, igwe igwe, planers, igwe ọkpọ, wdg).

5. Ịkụcha ngwa ọrụ aka dị iche iche dị ka ngwa, mma, mkpa, anyụike, hama, wdg.

ịgbado ọkụ

1. ịgbado ọkụ nke dị iche iche diamond mejupụtara malite ịgba ibe n’ibe;

2. ịgbado ọkụ nke dị iche iche ike alloy cutter isi na hụrụ pupụtara;

3. Ịkwado ntụtụ dị iche iche, iberibe igwu mmiri, ọkpọkọ ọkpọ, klọk kịtịm, ibepu ikuku na ngwa ndị ọzọ a na -egwupụta akụ;

Mgbakwunye

1. Various super audio frequency induction heating equipment or partial annealing treatment

2. Nlekọta ọgwụgwọ nke ngwaahịa igwe anaghị agba nchara dị iche iche

3. Heating annealing and swelling of metal materials

Other heating fields

1. mkpuchi mkpuchi nke aluminom-plastic ọkpọkọ, eriri na wires;

2. Aluminom foil akàrà eji na nri, ihe ọ beụ ,ụ, na ụlọ ọrụ ọgwụ

3. Ịkwado ọla edo na ọla ọcha

4. Ọla dị oke ọnụ ahịa na -agbaze: agbaze ọlaedo, ọlaọcha, ọla kọpa, wdg.