Drop-out fuse tube

The drop-out fuse tube is made of uninterrupted fiber wet winding. It is specially developed for the structural parts of high-voltage electrical equipment such as reactors, arresters, fuses, transformers, on-load tap-changers, transformers, etc. The product performance parameters meet the requirements of IEC standards .

Basic parameter:

1: Winding angle, 45～65 (iyo inoputika kona inogona kugadziriswa maererano nezvinodiwa zvakasiyana kuti uwane zviri nani zvemichina yekuita zvinodiwa);

2: Fiber content (uremu reshiyo), 70～75%;

3: Density, 2.00 g/cm3;

4: Mwero wekutora mvura, isingasviki 0.03%;

5: Axial thermal yekuwedzera coefficient, 1.8 E-05 1/K;

6: Girazi shanduko yekushisa, 110～120 ℃;

7: Kuramba kwemakemikari. Mineral mafuta: yakanaka kwazvo;

8: Solvent uye dilute asidhi: yakanaka kwazvo;

9: Tensile modulus ye elasticity, axial 14000 MPa;

10: Kusimba simba; axial 280 MPa; circumferential 600 MPa;

11: Kuveura simba: 150 MPa;

12: Flexural simba: 350 MPa mu axial direction;

13: Kudzvinyirira simba: axial 240 MPa;