Sucker rod surface quenching

1) Specifikimet e pjesës së punës dhe konfigurimi i sensorit

A total of 3 sets of quenching inductors are required . The heating range of the workpiece is 16-32mm . The quenching part uses super audio frequency power, the power is 250KW , and the frequency is designed at 10-30KHz to ensure uniform heating.

Numër serik	Specifikim	Gama (mm)	Gjatësia (m)	Sensori i përshtatjes
1	Φ 16- Φ 19	16-19	8-11	GTR-19
2	Φ 22- Φ 25	22-25	8-11	GTR-25
3	Φ 28.6- Φ 32	28.6-32	8-11	GTR-32

2) Përshkrimi i rrjedhës së procesit

First, manually place the required workpiece (sucker rod) on the feeding storage rack (usually hoisted to the top by a crane), the storage rack is equipped with an integral turning mechanism, and the turning mechanism will be adjusted according to the set beat (time). The material is turned to the feeding conveyor, and then the feeding drives the bar material forward, and the material is sent to the quenching heating inductor. Then the workpiece is heated by the quenching heating part. After rapid heating, the workpiece (workpiece rotation) is driven by the inclined roller to pass through the quenching water spray ring for spray quenching. The entire quenching area is covered by a transparent protective cover.
3) Përshkrimi i parametrit të pajisjes

projekt	250Kw quenching equipment
Modeli i furnizimit me energji elektrike	CYP/IGBT-250
Rated power ( Kw )	250
Nominal frequency ( KHz )	10-30
Tensioni i hyrjes (V)	380
Rryma e hyrjes (A)	410
Rrymë DC (A)	500
Temperatura e ngrohjes	900 ℃± 10 ℃ (Temperatura e shuarjes është 870 ℃± 10 ℃)
Transformer capacity ( Kva )	≥ 315Kva
Prodhimi i projektimit të linjës së prodhimit	Projektim sipas φ 25 , 4m/min
Vërejtje	The material is in accordance with 20CrMo , and the quenching water spray pressure requires a spray pressure of 1.5-3 kg / cm. The effective quenching depth is calculated as 8%-13% of the diameter .