超級音響感應加熱機

A、概述：超音頻高於傳統中頻（10KHZ），低於傳統高頻（100KHZ）； 我公司超音頻頻段設置為15-35KHZ。

Therefore, the hardened layer is shallower than the intermediate frequency, and deeper than the tube high frequency; it fills the process gap that sometimes the intermediate frequency quenching of some parts is too deep and the high frequency quenching is too shallow. It is very suitable for quenching small and medium-sized workpieces, and the hardened layer of the workpiece is about 1-2.5mm.

我公司超音頻感應加熱機採用德國進口功率器件IGBT為特色器件，電路採用串聯諧振。 傳感器上有安全電壓。 體積小、重量輕、安裝操作方便、節能省電，是工件淬火設備的理想選擇。 我公司生產的超音頻感應加熱機從16KW到230KW不等。 

B、超音頻感應加熱設備廣泛應用於： 

1、各種汽車零部件、摩托車零部件的高頻淬火處理。 如：曲軸、連桿、活塞銷、曲柄銷、鏈輪、凸輪軸、氣門、各種搖臂、搖臂軸； 變速箱中的各種齒輪、花鍵軸、半傳動軸、各種小軸、各種撥叉、制動轂、制動盤等的淬火熱處理；

2. Heat treatment of various hardware tools, hand tools and knives. Such as the quenching of pliers, wrenches, screwdrivers, hammers, axes, kitchen knives, sugarcane knives, sharpening rods, etc.;

3. Guiding shoe quenching and slide quenching equipment for coal mines;

4. High-frequency quenching of various hydraulic and pneumatic components Heat treatment. Such as the column of a plunger pump;

5.金屬零件的熱處理。 如各種齒輪、鏈輪、各種軸、花鍵軸、銷等的高頻淬火處理； 大型齒輪單齒淬火熱處理；

6、機床行業機床床身導軌的淬火處理；

7. Plug and rotor pumps The rotor; the quenching treatment of the reversing shafts on various valves, the gears of gear pumps, etc.
C. 超音頻感應加熱機選型參數

D.What is the difference between super audio frequency induction heating machine and medium frequency induction heating equipment?

Super audio frequency induction heating machine : It has a hardening depth of 0.5 to 2 mm (millimeters), which is mainly used for small and medium-sized parts that require a thin hardened layer, such as small modulus gears, small and medium-sized shafts, etc.

中頻感應加熱設備：

有效硬化深度為2～10毫米（毫米），所需硬化層主要是要求較深的零件，如中模數齒輪、高模數齒輪、較大直徑軸。

Is the difference in thickness

E.超音頻感應加熱機冷卻水配置方法

高頻加熱設備和感應器內部必須用水冷卻，水質必須乾淨，以免堵塞冷卻管道。 如果供水由水泵泵送，請在水泵進水口安裝過濾器。 冷卻水的溫度不應高於45C，否則會引起設備報警甚至過熱損壞。 具體要求必須按表準備。

F.The super audio frequency induction heating machine chooses the specification of the power cord.