What is the reason for the high temperature furnace alarm of the високотемпературна експериментальна електрична піч?

1. Over temperature alarm

повне г, повне г,, показали, від, номер, XNUMX високотемпературна дослідна електрична піч is a device that provides a high-temperature working environment, and the temperature and constant temperature are relatively strict. Due to the different properties of the experimental materials, the temperature must be different. If the temperature control of the high-temperature experimental furnace fails, the set temperature cannot be kept constant, and the temperature exceeds the experimental temperature, which will damage the experimental materials and the resistance of the box-type resistance furnace. damage. Therefore, the високотемпературна дослідна електрична піч must have an over-temperature alarm device to effectively ensure the safety of the experiment.

2. Timing prompt alarm

The high-temperature experimental electric furnace is also called a high-temperature muffle furnace, which is a high-temperature resistance electric furnace of cyclic operation. The high-temperature experimental electric furnace can be used for sintering, heating and heat treatment in electric power, chemical industry, coal, building materials, scientific research institutions and universities. According to the length of heating time of the experimental materials, set the required constant temperature time, automatic control, the alarm time is up, and stop constant temperature at the same time, natural cooling, no special care is required. Effectively improve work efficiency. Therefore, the high-temperature experimental electric furnace must have a timing device to effectively improve work efficiency.

3. Fault alarm

The high temperature experimental electric furnace controls the set temperature, heating and constant temperature through the temperature controller. The temperature in the furnace is collected by a temperature sensor. If the temperature sensor is damaged, the temperature in the collection furnace is not accurate. This will result in failure of the experiment and damage to the high-temperature test furnace. Therefore, the high-temperature experimental electric furnace must be equipped with a fault alarm device to effectively ensure the safety of the experiment.