Peć za indukcijsko grijanje reactor ‍Structural features:

1. The reactors of the induction heating furnace are of single-phase structure and are of iron core type.

2. The iron core of the induction heating furnace reactor is made of low-loss cold-rolled silicon steel sheet, and the core column is divided into uniform small sections by multiple air gaps. The reactive air gap does not change during operation and is noise-free.

3. The reactor coil of the induction heating furnace is made of T2 rectangular copper tube, and it runs in water cooling mode, which has a good heat dissipation effect.

4. After the coil of the reactor of the induction heating furnace is completed, it goes through the process of pre-baking→vacuum dipping→heat-baking and curing. The H-level dipping varnish is used to make the coil of the reactor have a very high heat resistance level, which can ensure the reactor It also operates safely and silently at high temperatures.

5. Non-magnetic materials are used for the part of the fasteners of the reactor core column of the induction heating furnace to ensure that the reactor has a low temperature rise.

6. The exposed parts of the reactor of the induction heating furnace are all treated with anti-corrosion treatment, and the lead-out terminals are made of tinned copper bars.