Operation of High Frequency Heating and Quenching Machine Tool

First, before operating the high-frequency heating and quenching machine tool, check whether the machine system is normal, ensure that the machine door is closed, the operator should be familiar with the operation method of the machine, the operator should wear insulating gloves when working, and remove the burrs of the workpiece when heating the workpiece to avoid When heating the workpiece, arcing occurs. If the equipment fails, immediately disconnect the power supply, and then repair the fault. Do not blindly operate and check under the condition of power on.

When the high-frequency heating and quenching machine tool is working, the internal voltage can reach 15KV, so the equipment should be grounded. In order to protect the operator’s personal life, the insulation inside the induction heating equipment should be reasonable to prevent leakage. When operating the high-frequency heating and quenching machine, it should be well ventilated, clean and dry. The equipment must be powered on by more than two people, and the person in charge of the operation must be designated.