Do you know the function of the control circuit of Induktionsheizgeräte?

(1) The adjustment control circuit must carry out functional control on part of the main power circuit of the system software such as the rectifier circuit and the rectifier circuit. For the rectifier circuit and the rectifier circuit, it is necessary to keep the parameters of the system software (such as current, output working voltage, etc.) from deviating from their preset values ​​under various oscillations.

(2) When the above parameters exceed their specified values ​​due to various common faults, the control circuit should block the controller, so that the rectifier circuit can be switched to the working attitude of the inverter power supply.

(3) In order to exceed the purpose of adjustment and maintenance, the system software must have the ability to accurately measure and monitor various parameters. For example, accurate measurement and monitoring of parameters such as working pressure, water output, temperature of cooling circulating water, average air temperature in the control cabinet, high-frequency working voltage and current.

(4) The load frequency of the intermediate frequency heating switching power supply must maintain a fully automatic tracking function.

1. Control in order to coordinate each part of the work, to ensure that all switching power supplies can operate normally according to the predetermined program flow, and the system software must have strict control and actual operation.