How to correctly choose the crucible mold of the induction melting furnace?

The crucible of the induction melting furnace is an important part of the composition of the induction melting furnace, so this part must be able to withstand high temperatures well, and be able to insulate and heat insulation, and at the same time conduct energy transfer. Moreover, the crucible mold must have good anti-scouring and compression capabilities.

At the same time, the equipment in the induction melting furnace must have electrical characteristics and will not reduce the stirring ability due to the influence of the magnetic field. The size and depth of these molds are determined by the thickness of the furnace wall and bottom. If the selected mold is too large, the furnace wall will become thinner for this reason. In this way, the static pressure of the induction melting furnace will increase as the capacity of the crucible increases, and the increased scouring force on the crucible wall will affect the service life of the furnace. If the mold is too small, the furnace wall will become thicker, so the static pressure The strong will be reduced due to the reduction of the crucible capacity, so the scouring force that the crucible wall can withstand will also be reduced, so that the service life of the induction melting furnace can be enhanced. However, in this case, the resistance will also become larger, reducing the power factor, and the consumption cost will also become larger. Therefore, we must choose the right mold.