Trapezoidal aluminum ingot kayan aikin dumama kan layi

1. Ana amfani da wannan saitin kayan aiki don haɓaka yawan zafin jiki na kan layi na trapezoidal aluminum ingots. Matsakaicin ƙarfin kayan aiki shine 350KW, ƙimar ƙima shine 200HZ, kuma ana haɓaka zafin jiki akan layi akan 100-120 °C. 2500 × 1000 × 1300mm, jimlar nauyin kusan 2.5T ne, kuma samar da ruwa yana kusan 15 t / h.

2. Siffofin fasaha na trapezoidal aluminum ingot on-line dagawa kayan aiki

3. Lantarki bayanin fasaha na trapezoidal aluminum ingot on-line dagawa kayan aiki

Sashin wutar lantarki na cikakken saitin kayan aiki ya haɗa da ma’aikatun sarrafa wutar lantarki na matsakaici, tsarin kula da madauki na zafin jiki, na’ura mai sarrafawa ta waje, bankin capacitor diyya mai amsawa, da sauransu.

Matsakaicin mitar wutar lantarki shine na’urar musayar mitar thyristor, ƙarfin shigarwar shine 380V, 50Hz, da ƙarfin fitarwa.

350KW, ikon za a iya gyara steplessly, da kuma fitarwa mita ne 0.2KHz. An ƙaddara launi na majalisar bisa ga bukatun mai amfani, kuma girman girman shine 2500 × 1000 × 1300mm, kamar yadda aka nuna a cikin adadi a sama.

Matsakaicin tsarin kula da mitar cikakken dijital ne kuma bashi da iko na gudun ba da sanda. Yanayin fara mitar shara ta musamman, tare da aikin nasarar farawa 100%.

4. Ƙa’idar tsarin kula da tsarin zafin jiki na rufaffiyar madauki na trapezoidal aluminum ingot online dagawa kayan aiki:

, Babban kwamitin kula da wutar lantarki na tsaka-tsakin tsaka-tsaki an tsara shi tare da yanayin rufewar madauki mai kula da yanayin zafi, kayan aikin zafin jiki yana ɗaukar nauyin SR93 na Jafananci tare da kayan daidaitawa na PID, kuma ma’aunin ma’aunin zafin jiki na infrared mai nisa yana ɗaukar jerin Opris CT na Jamus. Ma’aunin zafi da sanyio, wanda ke auna zafin jiki -40-900 ℃. Na farko, saita zafin zafin jiki a cikin kayan sarrafa zafin jiki. Bayan an kunna wutar, ma’aunin zafi da sanyio yana auna zafin dumama a ainihin lokacin kuma yana ciyar da shi zuwa kayan sarrafa zafin jiki. Kayan aikin sarrafa zafin jiki yana kwatanta ma’aunin zafin jiki tare da saita zafin jiki na dumama kuma yana fitar da siginar analog zuwa babban allo na IF. , Babban kwamiti na sarrafawa ta atomatik yana daidaita madaidaicin kusurwa na thyristor bisa ga matakin siginar, don haka za’a iya daidaita ikon fitarwa na wutar lantarki tare da matakin siginar analog don cimma maƙasudin kula da yanayin zafin jiki na rufe-madauki. . Saboda tsarin auna zafin jiki yana ɗaukar ma’aunin zafi da sanyio na musamman na aluminum, ma’aunin zafin jiki daidai ne. Canja wurin siginar fiber na gani yana tabbatar da kwanciyar hankali na sarrafa rugujewa, kuma ana aiwatar da aikin kan layi. Ƙirar mai amfani da mai amfani na ƙirar aikin mita mai sarrafa zafin jiki yana da sauƙi don daidaitawa kuma mai sauƙin lura. Gabaɗayan tsarin yana da atomatik da amsawa, an tsara shi musamman don auna aluminum.

Bayanin kayan aiki 350KW/0.2KHZ

Zane na sabbin kayan aikin haɓaka zafin jiki na kan layi 350KW/0.2KHZ