SD3-2-10-8 energy-saving program-controlled tube furnace detailed introduction

SD3-2-10-8 energy-saving program-controlled tube furnace:

■Lightweight fiber liner, good heat insulation performance, fast heating speed

■Integrated production, easy to use, high-quality thin steel plate, surface spray

Kayan aikin yana da madaidaicin madaidaici, daidaiton nuni shine digiri 1, kuma daidaiton ya kai matsayin ƙari ko rage digiri 1 a ƙarƙashin yanayin zafin jiki na yau da kullun.

Control Tsarin sarrafawa yana amfani da fasahar LTDE, tare da aikin shirye-shiryen 30-band, kariya ta kan-zafin jiki biyu

Energy-saving program-controlled tube furnace SD3-2-10-8 is a kind of high temperature experimental equipment. The use of high-quality ultra-light energy-saving ceramic fiber liner is energy-saving and efficient, and the energy consumption is only one-half of the ordinary tube furnace. The high temperature resistance wire generates heat, and the heat insulation layer is a fiber cotton blanket and a metal shell. Ordinary quartz furnace tubes and furnace tubes with sealing devices that can be vacuumed or protected by gas can be selected according to needs. You can also configure it yourself.

The controller is located under the furnace body, integrated production, the electrical connection of the furnace body and the temperature controller has been completed before leaving the factory, and can be used after power is turned on. The control system adopts the LTDE programmable meter with a set heating rate, PID+SSR system Synchronous and coordinated control makes it possible for the consistency and reproducibility of experiments or experiments. With automatic constant temperature and time control functions, and with a secondary over-temperature automatic protection function, the control is reliable and safe to use

Details of SD3-2-10-8 energy-saving program-controlled tube furnace:

Tsarin makera da kayan aiki

Furnace shell material: The outer box is made of high-quality cold plates, treated with phosphoric acid film salt, and sprayed at high temperature, and the color is computer gray;

Furnace material: It is made of six-sided high-radiation, low-heat storage and ultra-light fiber stove board, which is resistant to rapid cold and heat, and is energy-saving and efficient;

Insulation method: fiber cotton blanket;

Temperature measurement port: The thermocouple enters from the bottom of the furnace body;

Terminal: The heating wire terminal is located below the furnace body;

Furnace body bracket: made of angle steel frame metal panel, built-in control system and compensation wire, located under the furnace body

Heating element: high temperature resistance wire, heating on all sides of the inner chamber;

Nauyin injin duka: kusan 20KG

Standard marufi: katako akwatin

Bayanai na Musamman

Yanayin zafin jiki: 100 ~ 1000 ℃;

Digiri na canzawa: ± 1 ℃;

Nuna daidaito: 1 ℃;

Furnace size: φ80×380MM;

Heating area: 280MM

Can be equipped with furnace tube outer diameter: φ80MM;

Yawan zafi: ≤50 ° C/min; (ana iya daidaita shi ba tare da izini ba zuwa kowane saurin ƙasa da digiri 50 a minti ɗaya)

Ikon injin duka: 2KW;

Tushen wutan lantarki: 220V, 50Hz

Tsarin kula da yanayin zafi

Auna zafin jiki: K-indexed nickel-chromium-nickel-silicon thermocouple;

Control system: LTDE fully automatic programmable instrument, PID adjustment, control accuracy 1℃

Complete set of electrical appliances: use brand contactors, cooling fans, solid state relays

Tsarin lokaci: ana iya saita lokacin dumama, sarrafa lokacin zafin jiki akai -akai, kashewa ta atomatik lokacin da aka kai lokacin zafin jiki akai -akai;

Over-temperature protection: built-in secondary over-temperature protection device, double insurance;

Operation mode: full range adjustable constant temperature, constant operation; program operation

Sanye take da bayanan fasaha da na’urorin haɗi

Umarnin aiki

katin garanti

Babban kayan aiki

LTDE kayan sarrafawa mai sarrafa shirye -shirye

sasantacciyar ƙasa

Matsakaici matsakaici

Thermocouple

Motar sanyaya

High temperature furnace wire