SD3-2-10-8 energy-saving program-controlled tube furnace detailed introduction

SD3-2-10-8 energy-saving program-controlled tube furnace:

■Lightweight fiber liner, good heat insulation performance, fast heating speed

■Integrated production, easy to use, high-quality thin steel plate, surface spray

Instrumen memiliki akurasi tinggi, akurasi tampilan 1 derajat, dan akurasi setinggi plus atau minus 1 derajat di bawah kondisi suhu konstan.

Sistem kontrol mengadopsi teknologi LTDE, dengan fungsi yang dapat diprogram 30-band, perlindungan suhu berlebih dua tingkat

Energy-saving program-controlled tube furnace SD3-2-10-8 is a kind of high temperature experimental equipment. The use of high-quality ultra-light energy-saving ceramic fiber liner is energy-saving and efficient, and the energy consumption is only one-half of the ordinary tube furnace. The high temperature resistance wire generates heat, and the heat insulation layer is a fiber cotton blanket and a metal shell. Ordinary quartz furnace tubes and furnace tubes with sealing devices that can be vacuumed or protected by gas can be selected according to needs. You can also configure it yourself.

The controller is located under the furnace body, integrated production, the electrical connection of the furnace body and the temperature controller has been completed before leaving the factory, and can be used after power is turned on. The control system adopts the LTDE programmable meter with a set heating rate, PID+SSR system Synchronous and coordinated control makes it possible for the consistency and reproducibility of experiments or experiments. With automatic constant temperature and time control functions, and with a secondary over-temperature automatic protection function, the control is reliable and safe to use

Details of SD3-2-10-8 energy-saving program-controlled tube furnace:

Struktur dan bahan tungku

Furnace shell material: The outer box is made of high-quality cold plates, treated with phosphoric acid film salt, and sprayed at high temperature, and the color is computer gray;

Furnace material: It is made of six-sided high-radiation, low-heat storage and ultra-light fiber stove board, which is resistant to rapid cold and heat, and is energy-saving and efficient;

Insulation method: fiber cotton blanket;

Temperature measurement port: The thermocouple enters from the bottom of the furnace body;

Terminal: The heating wire terminal is located below the furnace body;

Furnace body bracket: made of angle steel frame metal panel, built-in control system and compensation wire, located under the furnace body

Heating element: high temperature resistance wire, heating on all sides of the inner chamber;

Berat seluruh mesin: sekitar 20 KG

Kemasan standar: kotak kayu

Spesifikasi Produk

Kisaran suhu: 100 ~ 1000℃;

Tingkat fluktuasi: ±1℃;

Akurasi tampilan: 1℃;

Furnace size: φ80×380MM;

Heating area: 280MM

Can be equipped with furnace tube outer diameter: φ80MM;

Tingkat pemanasan: 50°C/menit; (dapat secara sewenang-wenang disesuaikan dengan kecepatan apa pun yang lebih rendah dari 50 derajat per menit)

Seluruh tenaga mesin: 2KW;

Sumber daya: 220V, 50Hz

Sistem kontrol suhu

Pengukuran suhu: Termokopel nikel-kromium-nikel-silikon yang diindeks K;

Control system: LTDE fully automatic programmable instrument, PID adjustment, control accuracy 1℃

Complete set of electrical appliances: use brand contactors, cooling fans, solid state relays

Sistem waktu: waktu pemanasan dapat diatur, kontrol waktu suhu konstan, shutdown otomatis ketika waktu suhu konstan tercapai;

Over-temperature protection: built-in secondary over-temperature protection device, double insurance;

Operation mode: full range adjustable constant temperature, constant operation; program operation

Dilengkapi dengan informasi teknis dan aksesoris

Instruksi Operasi

kartu garansi

Komponen utama

Instrumen kontrol yang dapat diprogram LTDE

relay solid state

Relay intermediate

Termokopel

Motor pendingin

High temperature furnace wire