Ƙarshen zobe na matsakaicin mitar brazing kayan aiki

1, Matsakaicin mitar shigar brazing Bukatun Fasaha

1. Aikin walda:

1.1 rotor ƙarshen zobe da mashaya jagora.

1.2 Material: jan karfe T2, tagulla H62, carbon karfe, bakin karfe 1Cr13,

1.3 solder: HL205 , HL204 , HL303 .

1.4 na’ura mai juyi karshen zobe m diamita size kewayon ne φ396mm-φ1262mm, kauri 22mm-80mm,

1.5 rotor nauyi: kasa da 10 ton (tare da shaft)

2. Mitar shigar brazing (na’ura) Bukatun fasaha

2. Ana iya sanya injin ɗin har zuwa rotor ɗaya tare da diamita na 1 mm ko ƙasa da haka. Tsawon itacen ya kai mita 1262 kuma nauyinsa bai wuce tan 4.5 ba.

2.2 tare da rotor shaft za a iya welded, da waldi iya zama babu axis.

2.2 aiki mai sauƙi na inji, za’a iya maye gurbinsa tare da firikwensin diamita daban-daban.

2.4. Ф800mm karshen workpiece da za a integrally welded zobe, da bangaren ya zama mafi ф800mm waldi.

2.5 workpiece rotatably a cikin na’ura, da firikwensin tsawo za a iya gyara.

2.6. Kayan aikin yana da sauƙin ɗauka da saukewa, aminci kuma abin dogaro.

3 soldering yanayin zafin jiki da tsarin sarrafawa:

3.1. Tsarin ma’aunin zafin jiki na infrared zai sarrafa tsarin don ma’aunin ma’auni na workpiece kuma daidaita ikon fitarwa ta hanyar daidaita tsarin sarrafa wutar lantarki ta IF, don isa ga zazzabi a cikin kayan aikin da za a welded zuwa ƙimar ƙima, walƙiyar zafin jiki. kula da daidaito na workpiece ya kamata game da ± 2% .

Magana mai alaƙa:

1,Ƙarshen zoben matsakaicin mitar kayan aikin brazing shimfidar wuri

2,Ƙarshen zobe na matsakaicin mitar kayan aikin brazing

3,Bayanin halayen fasaha na ƙarshen zoben matsakaicin mitar brazing kayan aikin

4,Matsakaicin ƙayyadaddun ƙayyadaddun motsi na ƙayyadaddun ƙayyadaddun ƙayatarwa

5,Ƙarshen Motar matsakaicin mitar brazing zafin jiki na atomatik sarrafa tsarin

6,Ƙarshen motojin matsakaicin mitar brazing

http://www.songdaokeji.com/a/chanpin/induction_heating_furnace/2019/0724/142.html