Dab tsi yog qhov precautions for using induction heating equipment?

1. Pay attention to avoid running for too long to prevent problems

Since the heating process of the power supply is relatively long, it is easy to cause overheating if the power is not cut off for a long time. When using the induction heating equipment, you must pay attention to avoid running for a long time, and pay attention to remove the combustible materials around the power supply, otherwise it will be easy Fires can cause serious consequences, and long-term operation can easily damage the internal parts of the power supply, so pay special attention to it.

2. Note that there should be no water molecules around the power supply

The power supply itself cannot touch water molecules, which can easily cause internal mechanical damage. If the induction heating equipment is contaminated by water, it is easy to cause internal parts to rust and cause damage. Once rust occurs, you need to disassemble the machine to replace the parts, which will cause the cost of the parts. The reduction in the number of parts, and the relatively high risk of disassembling the machine is likely to reduce the number of parts and affect the use.

3. Be careful not to touch the power supply directly with body parts

The power supply itself emits relatively strong heat, so when using induction heating equipment, you must be careful not to touch the power supply with your own body parts. It is likely to cause your own burns, affect your health and cause a series of follow-up problems. If you want to touch it, please take the corresponding protective measures before you get started to avoid danger.

The main points of attention of induction heating equipment should be distinguished and judged according to the user’s use method. The use of induction heating equipment not only requires attention to avoid prolonged operation to prevent problems, but also to ensure that no water molecules are stored around the power supply. At the same time, you should also be careful not to directly touch the power supply with your body to cause danger and burns.