- 29
- Sep
Can pickling be used in industrial chillers?
Can pickling be used in industrial chillers?
In normal application, the chiller needs to be cleaned and cleaned regularly and scientifically. This is also an indispensable part of maintenance, mainly the condenser, evaporator, various pipelines, etc., the condenser and Evaporators, especially water-cooled condensers and evaporators, must be regularly cleaned and cleaned. This is undoubtedly. Air-cooled condensers and evaporators do not directly contact the cooling water on the outer layer, so they only need to pay attention. In terms of dust cleaning and cleaning, compared to scale, air-cooled condensers and evaporators are actually easier to clean and clean. Can pickling be applied to industrial chillers?
Can pickling be used in industrial chillers? Pickling is a method of cleaning metals. Can it be applied and used normally in industrial chillers? Let’s talk about it in detail below.
It is certain that pickling can be used as a cleaning method. However, the degree of dilution of the acid and the type of acid need to be considered. Fundamentally, almost all condensers can use pickling. The cleaning method is used for cleaning. In addition, you need to consider whether the parts of the chiller you want to clean, whether it is a certain part, or the cycle operation of the entire system, is cleaned and cleaned. These two aspects are completely different.
If cleaning and cleaning are in a cycle operation, you must ensure that the system is completely shut down, and the cleaning pump, the distribution tank, and the relevant valves of the chiller must be connected. If it is to be cleaned separately, the condenser must be removed, and then the diluted acid solution must be added to it, and it must be filled up to achieve the corresponding cleaning effect. The reason why the chiller needs to be cleaned is that there are many parts in the chiller that will affect the normal operation of the entire chiller, because these parts are cyclical parts, so it belongs to a cycle of the chiller, and it must be guaranteed to run normally. Row.