The chiller manufacturer tells you why you need to debug after installing an industrial chiller!

The chiller manufacturer usually conducts a comprehensive test after installing the արդյունաբերական մառախուղ. Some customers and friends may find it troublesome, but for the chiller that is installed for the first time and is ready to be put into use, this step is very critical for the customer. Some customers and friends may be a little confused. Today, a chiller manufacturer with more than 30 years of experience in the production and sales of chillers – tell you why you need to debug after installing industrial chillers.

1. Through the initial commissioning and test machine, it can be found whether there are faults and obstacles in the operation of the industrial chiller;

2. During the initial test, customers and friends can arrange for the staff responsible for the chiller to watch the whole process in the future, and carefully observe the specific operations of the factory staff on starting, shutting down, and recording the chiller data;

3. Whether the test result is good or bad can help customers and friends understand whether there is a fault in the industrial chiller, and the specific usage.

Through the initial comprehensive test, failures are discovered in advance, and questions are answered in advance, which can help customers and friends in the subsequent use of the chiller, reduce the failure rate, increase the life of the chiller, and maximize the role of the chiller.