Do you know the advantages of cable clamps? You’ll know after reading these

The cable clamp is composed of a clamp body, a spring, a pin shaft, a switch pin, etc. The H-shaped upper and lower inner sides of the clamp body are each provided with a guide groove, and the two ends of the guide groove are provided with four square holes corresponding to the upper and lower sides. There are two parallel connecting plates on one side, and one connecting plate on the other side, and round holes with the same diameter are opened on each connecting plate.

Its clamp body is made of steel plate as the skeleton, and the surface is made of nylon material, and the shape is a centrally drawn asymmetric H-shaped structure. The method of fixing the cable and the water pipe by the cable clamp is realized by the method of spring locking. The utility model has a wide range of applications and can be used in high-grade general mining and comprehensive mining.

Three advantages of cable clamps:

1. Easy to install: the cable branch can be made without stripping the insulation of the cable, and the connector is completely insulated. There is no need to cut off the main cable, and branch can be made at any position of the cable. The installation is simple and reliable, and it can be installed with electricity only by using a socket wrench.

2. Safe use: The joint is resistant to distortion, shockproof, waterproof, flame-retardant, anti-electrochemical corrosion and aging, and requires no maintenance. It has been used successfully for more than 30 years.

3. Cost saving: The installation space is extremely small, saving bridge and civil construction costs. Application in construction, no terminal box, branch box, no need for cable clamp return wire, saving cable investment. The cost of cable + piercing clamp is lower than other power supply systems, only about 40% of the plug-in bus, and about 60% of the prefabricated branch cable.

Cable vault refers to the structural layer for laying cables into the control room and (or) the instrument, control device, panel, table, and cabinet in the control room and/or electronic equipment room.

The cable clamp is composed of anti-eddy current clamps, fixed brackets and other products. Let us understand the classification of cable clamps:

1. The anti-eddy current fixture is suitable for the installation and fixing of 6~1000mm2 single-core branch cables, and FJ-11~14 is suitable for the installation and fixing of 6~240mm2 multi-core or twisted branch cables. It is molded with high-strength epoxy resin. , It has the advantages of anti-eddy current, flame retardant, no water absorption, high strength, complete variety, convenient installation, etc. It can be used with a fixed bracket or installed separately in the bridge frame.

2. The fixing bracket is suitable for the installation and fixing of 6~1000mm2 single-core branch cables, and ZJ-11~14 is suitable for the installation and fixing of 6~240mm2 multi-core or twisted branch cables, using cold-rolled steel plates for turning and welding. The surface is galvanized or sprayed with plastic, which has the characteristics of convenient installation, complete variety and beautiful appearance. The fixed bracket and the anti-eddy current fixture are used together.