Mkpa mmiri na -ekesa n’ime ọkụ na -agbaze ọla

In most metal smelting furnaces, the furnace body and the power cabinet have two independent water systems, an internal circulation system, an external circulation system, internal closed-circuit deionized water, and include a water-to-water heat exchanger, rectification Silicon, reactors, filter capacitors, inverter silicon, and resonance capacitors are all connected to this system. Since the internal water system circulates in the DC high voltage, the internal cooling water will generate electric ions under the action of the pipeline DC high voltage. After a period of time, the concentration of electric ions will gradually increase. When the concentration of electric ions exceeds the required value, the high DC voltage will corrode the copper joints through the cooling water with high concentration of ions, resulting in the situation seen in the photo below. If the water connector corrodes and breaks during use of the power supply, the pressurized cooling water will spray out, causing major equipment accidents, and the cooling water with high concentration of electric ions will reduce the insulation of the system, which is more likely to cause damage to the thyristor Therefore, the conductivity of the cooling water should be checked regularly, and it must be less than 10us/cm. If the conductivity is greater than 100us/cm, replace the circulating cooling water in all power cabinets, and it is recommended to replace it every six months.

Enwere nsogbu ọzọ na iji mmiri jụrụ oyi nke ekwesịrị ka elebara anya. Ekwesịrị ịwụnye valvụ nke na -eme ka mmiri jụrụ. Agbanyeghị, n’iji ya eme ihe, a na -arụnye ọtụtụ sistemụ jụrụ oyi mmiri na -enweghị valvụ ikecha. Mgbe ọkụ anaghị arụ ọrụ ogologo oge, gas dị mfe ịbanye na nkewa mmiri. Mgbe ebidogharịrị ọkụ na -enwu enwu, akụkụ nke gas ga -adịgide n’ime mmiri na igbe mmiri jụrụ oyi nke ihe ndị mejupụtara ya, enweghị ike ịtọhapụ ya, na -ebute ọdịda nke ngwa a. Ịjụ oyi nke mmiri na -ekesa na -eme ka oke okpomọkụ dị oke ọkụ iji mebie ihe ndị mejupụtara ya. Ya mere, a naghị eji usoro jụrụ oyi mmiri na-enweghị valvụ mmiri ogologo oge, ọ na-arụ ọrụ ọzọ. A ga -atọpụ ihe nkedo mmiri dị na ebe kachasị elu nke onye na -ekewa mmiri iji wepụ gas fọdụrụnụ.