Njirimara nke ọkụ induction ugboro ọkara

Njirimara nke ọkụ induction ugboro ọkara:

Nke mbụ, njirimara nke ọkụ induction ugboro ọkara:

1. Igwe ọkụ induction ugboro ugboro na-enye ike site na ọkụ ọkụ na-agbanwe agbanwe ma nwee mmepụta ike mgbe niile iji hụ na njikwa okpomọkụ ziri ezi.

2. Igwe ọkụ induction ugboro ugboro na-anabata teknụzụ njikwa ike dị iche iche, nke nwere nha eriri igwe kacha dị mkpụmkpụ n’okpuru ebe a na-ahụta ọdịiche dị n’okpomọkụ dị n’etiti isi na elu.

3. Igwe ọkụ induction nke etiti etiti nwere ike ịmepụta gradient okpomọkụ axial, nke bara uru iji melite arụmọrụ extrusion;

4. Ngwa kọntaktị ma ọ bụ anaghị ana-akpọtụrụ maka ọkụ induction ugboro ugboro

5. Eserese ọrụ eserese, nleba anya otu nkwụsị nke paramita arụ ọrụ, ọnọdụ ọrụ na isi ihe kpatara 6. Elu nke eriri induction na-anabata ihe mkpuchi pụrụ iche dị elu iji hụ na arụ ọrụ kwụsiri ike ogologo oge.

7. Ngwa ngwa imewe nke na-enyere aka nke ọma na kọmpụta iji hụ na nsonaazụ ngụkọ ngwa ngwa na nke ziri ezi 8. Usoro kpo oku na-achịkwa kọmputa nke ọkụ induction ugboro etiti oge.

Nke abụọ, etiti ugboro induction ọkụ kpo oku alloy ígwè mmanya parameters

Dayameta oghere: 10mm ~ 500mm

Ike: 5kw ~ 5000kw

Ugboro: 100Hz ~ 20KHz

3. Parameters nke ọkara ugboro induction ọkụ kpo oku ọla kọpa ingots

Ogologo Ingot: 350 mm Ogologo Ingot: 600 mm

Enyere ike: 2×800kw ugboro ọrụ: 200 Hz

Nrụpụta: 10 t/h (400ºC ruo 900ºC)

Isi okpomọkụ dị iche iche: <50°C

Nke anọ, paramita nke etiti ugboro induction ọkụ ọkụ aluminom ingots

Ogologo Ingot: 500 mm Ogologo Ingot: 1100 mm

Ike agbagoro: 1000kw Ugboro ọrụ: 200 Hz