What are the maintenance methods for fiberglass tubes?

The molding process of the glass fiber tube is to impregnate the glass fiber filaments with resin, then solidify it in a high-speed polymerization device integrating photoelectricity and heat, and then form it by pulling and pultrusion. Fiberglass tubes are now widely used in our lives, whether they are used as tent poles in life or used in aerospace equipment. Although fiberglass pipe is a high-quality material, it also needs maintenance. What are the maintenance methods for fiberglass pipe?

1. Cleaning with clean water: Rinse the inner wall of the glass fiber tube with clean water, but the impurities such as calcium, magnesium ion scale, and biological mucus attached to the inner wall of the glass fiber tube cannot be completely removed, and the effect is not very obvious.

2. ניקוי שיקויים

Potion cleaning is to add chemical reagents to water, but the chemical composition is corrosive to the glass fiber tube, and it also shortens the life of the glass fiber tube, which is not a very good method.

3. ניקיון פיזי

In the market, the principle of cleaning is basically based on compressed air as power, using a launcher to launch a special projectile larger than the inner diameter of the pipe into the glass tube, which can move along the inner wall of the pipe at high speed to achieve the effect of cleaning the inner wall of the pipe. The method has obvious cleaning effect and basically does not have adverse effects on the pipeline.