Why is the descaling of the chiller important?

First of all, if the dirt and scale cannot be cleaned and removed in time, the heat of the components will not be dissipated, and the cooling capacity will naturally not be able to meet the refrigeration needs of the refrigeration enterprise. Therefore, the салқындатқыш needs to be regularly descaled, cleaned and cleaned.

Secondly, scale will cause the load of the chiller to increase.

After the cooling capacity load of the chiller increases, it will greatly increase the power consumption and the degree of wear and tear of the chiller system, which will eventually lead to a lower life of the chiller, which will greatly increase the cost of the enterprise. If the scale and dust are not cleaned, the cooling efficiency of the chiller will be reduced, even if the chiller can operate normally, it will not be satisfactory.

How to descale?

According to different chiller components, there are different descaling methods. If it is a condenser, because the degree of scale and dirt accumulation may be more serious, it is recommended to use a special one. If the maintenance period and cleaning period are relatively short, it can be manually descaled, or the system can be used to descale. The pipeline descale is even more difficult, because the pipeline is closed and it is impossible to perform descale after cutting. Therefore, other methods should be adopted. When a company purchases a chiller, it should specifically purchase a device for cleaning scale, and purchase a cleaning agent to cooperate with it, configure the cleaning solution in the liquid distribution tank, and then connect it to the cleaning Equipment, and connected to the chiller through a valve, the chiller can be cleaned and cleaned, and the effect is good, only need to pay attention to the concentration of the liquid to avoid corrosion of each component, and the cleaning time should not be too long, otherwise it will cause Corrosion of the pipeline.