Application fields of different models of индукциялык жылытуучу машиналар:

A, 50 machine application range:

1. Diathermic forging of round steel, bars and other workpieces with a diameter of less than Φ25mm;

2. Quenching of discs with a diameter of Φ150mm and shafts with a diameter of Φ50mm or less;

3. Quenching of guide rails of small instrument machine tools;

4. Welding of geological drill bits.

B, 80 machine application range:

1. Diathermic forging of round steel, bars and other workpieces with a diameter of less than Φ35mm;

2. Hardening of discs with diameter Φ260mm and shafts with diameter below Φ80mm;

3. Quenching of machine tool guide rails with cross-sections below 200mm.

C. 120 machine application range:

1. Diathermic forging of round steel, bars and other workpieces with a diameter of less than Φ45mm;

2. Hardening of discs with a diameter of Φ350mm and shafts with a diameter of Φ100mm or less;

3. Quenching of machine tool rails.

D. 160 machine application range:

1. Diathermic forging of round steel, bars and other workpieces with a diameter of less than Φ50mm;

2. Hardening of discs with diameters of Φ400mm, sprockets of Φ500mm, shafts below Φ150mm;

3. Quenching of machine tool rails.

E, 200 intermediate frequency machine application range:

1. Diathermic forging of round steel, square steel, bar and other workpieces with a diameter of less than Φ60mm;

2. Quenching of gears with a diameter of Φ500mm;

3. Φ800mm sprocket is quenched, the single tooth can be quenched with a modulus of about 50mm, and Φ250mm is about shaft quenching, the quenching is uniform, and the effect is good.

F, 300 intermediate frequency machine application range:

Diathermic forging of round steel, bars and other workpieces with a diameter of less than Φ70mm.

Application range of G, 500 intermediate frequency machine:

Integral diathermy forging of round steel, bars and other workpieces with a diameter of less than Φ120mm.