Индукцийн хайлах зуухны нэмэлт хэрэгсэл: resistance

The resistor is a resistor that is forcedly cooled by flowing deionized water (or distilled water). The inlet water temperature is between -40°-60°C. When installing the resistor, the water inlet end of the resistor is required to be at the bottom and the water outlet end is at the top. When in use, the cooling water should be passed first, and then the electricity should be turned on after the water flow reaches the requirement and fills the cavity of the resistor. When it is out of service, first cut off the power supply and then cut off the water to prevent the resistance body from being damaged by dry burning. It has the characteristics of high power, small size, stable operation, safety and reliability. Products are widely used in various electronic instruments and electrical equipment.

Product introduction: The aluminum shell resistor shell is made of aluminum alloy, with heat dissipation grooves on the surface, small size, high power, high temperature resistance, and strong overload capacity; high-power load resistors or test thermistors can be used for good heat dissipation or heat conduction. The cutting material is enclosed in an aluminum shell.

Specializing in the production of intermediate frequency furnaces, intermediate frequency induction furnaces, smelting furnaces, safe and reliable consultation hotline, high quality because of professionalism!