लागि सुरक्षा निर्देशनहरू उच्च आवृत्ति प्रेरण हीटिंग उपकरण

When the high-frequency induction heating equipment is working, the internal voltage can reach up to 15KV, so the equipment must be grounded. In order to ensure the personal safety of the operator, the insulation inside the induction heating equipment should be reasonable, so that there is no leakage, high-frequency induction heating equipment When working, radio frequency radiation will be generated. In order to prevent radiation damage to the human body, certain shielding protection measures must be taken.

First, before operating the high-frequency induction heating equipment, it is necessary to check whether the cooling system of the machine is normal, to ensure that the machine door is closed, the operator should be familiar with the operation method of the machine, the operator should wear insulating gloves when working, and remove the burrs of the workpiece when heating the workpiece. Avoid arcing when the workpiece is heated. If the equipment fails, immediately disconnect the power supply, and then repair the fault. Do not blindly operate and check when the power is on.

The machine room of the medium frequency induction heating equipment should be well ventilated and kept clean and dry. The maximum voltage of the intermediate frequency current can reach about 750V. The intermediate frequency induction heating equipment must have more than two people to start the operation, and designate the person in charge of the operation.