What is the quenching quality of the ਬੁਝਾਉਣ ਵਾਲਾ ਉਪਕਰਣ?

1. ਫਾਰਮ

This can be designed and manufactured according to the shape and specific conditions of the workpiece.

2. Number of turns

The number of turns of the inductor is mainly determined according to the working size, power and inner diameter of the quenching equipment. If the quenching process sprays water right after heating, you can make a single-turn inductor, but increasing the height is difficult.

In order not to reduce the output efficiency of high-frequency equipment, you can bend the copper tube into multiple turns, but the number of turns does not need to be too many. Generally, the height of the inductor should not exceed 60mm, and the number of turns should not exceed 3.

3. Making materials

The materials for making the inductor are: brass with a conductivity of not less than 96% of pure copper; industrial pure copper (copper tube).