For some questions and answers about epoxy glass fiber cloth laminate, you will know more after reading

Epoxy glass fiber cloth laminate is the base material of printed circuit boards. The material is glass fiber, and the main component is SiO2. The glass fiber is woven into a cloth and coated with epoxy resin, which is a very complicated process.

1. Use it to have a certain degree of plasticity and toughness as the shell of some equipment or machinery, such as cars, yachts, etc.

2, the substrate of the circuit board.

1. What are the specifications of epoxy glass cloth board and what is epoxy board?

The epoxy glass cloth board is yellow, the material is epoxy resin, and the epoxy glass fiber board is made of glass fiber, which is generally water green. Its temperature resistance is higher than that of the epoxy glass cloth board, and its insulation in all aspects is also better. On epoxy glass cloth

2. What is the difference between epoxy resin board and epoxy glass cloth board?

According to popular saying, the two are actually the same, but the epoxy resin board omitted the reinforcing material.

There is a difference between the two. There are many kinds of reinforcing materials for epoxy resin board, the common one is glass cloth, as well as glass mat, glass fiber, mica, etc., and they have different uses.

Epoxy fiberglass board is also called reinforced fiberglass board. It is suitable for mechanical, electrical and electronic components with high insulation. It has high mechanical and dielectric properties, good heat resistance and moisture resistance.

دا لاندې ځانګړتیاوې لري:

1. مختلف ډولونه

Various resins, curing agents, and modifier systems can almost adapt to the requirements of various applications on the form, and the range can be from extremely low viscosity to high melting point solids.

2. مناسب درملنه

Choose a variety of different curing agents, the epoxy resin system can almost be cured in the temperature range of 0～180℃.

3، قوي چپکونکی

د پولر هایدروکسیل او ایتر بانډ موجودیت د epoxy رال مالیکولر سلسله کې موجود دی چې دا مختلف موادو ته لوړ چپک کوي. د درملنې په وخت کې د epoxy رال انقباض کم دی، او د داخلي فشار تولید لږ دی، کوم چې د چپک کولو ځواک ښه کولو کې هم مرسته کوي.

4, low shrinkage

“د epoxy رال عکس العمل او د درملنې اجنټ کارول کیږي د رال مالیکول کې د epoxy ګروپونو مستقیم اضافه عکس العمل یا د حلقوي خلاصولو پولیمیریزیشن عکس العمل لخوا ترسره کیږي ، او هیڅ اوبه یا نور بې ثباته محصولات نه خپریږي. د غیر مشبوع پالیسټر رالونو او فینولیک رالونو سره پرتله کول ، دوی د درملنې پرمهال خورا ټیټ انقباض (له 2٪ څخه کم) ښیې.

5. میخانیکي ځانګړتیاوې

د درملنې شوي epoxy رال سیسټم غوره میخانیکي ملکیتونه لري.