site logo

5 ótimas maneiras de reparar o forno de fusão por indução

5 ótimas maneiras de reparar o forno de fusão por indução

1. Método básico de manutenção de forno de fusão por indução 1. Sound judgment

Induction melting furnace induction heating frequency coverage is very wide, using different induction melting furnaces, the sound produced by the frequency is different, and people’s perception of sound is different. According to this, experienced maintenance personnel can roughly determine the range of the operating frequency of the induction melting furnace and whether the operation of the induction melting furnace is a normal sound, which is the method of listening to the fault sound for the maintenance of the induction melting furnace.

2. Basic maintenance method of induction melting furnace, 2. Odor judgment

Cheire se há algum cheiro anormal ao redor do forno de fusão por indução, como cheiro de coque doméstico, cheiro de plástico, etc. Este é o cheiro da manutenção do forno de fusão por indução.

3. Método básico de manutenção do forno de fusão por indução, 3. Marcar julgamento

Observe se há traços de avaria e descarga no equipamento do forno de fusão por indução, se os diodos emissores de luz na placa de controle do circuito integrado, as luzes indicadoras do painel de controle e as indicações da porta de entrada e saída do PLC estão anormais. Esta é a esperança para a manutenção do forno de fusão por indução.

4. Basic maintenance method of induction melting furnace, 4. Instrument inspection

After listening, smelling, looking and asking about the maintenance of the induction melting furnace, the fault location of the induction melting furnace can be preliminarily determined. If the fault range cannot be determined, the power supply can only be gradually transmitted according to the characteristics of the induction melting furnace equipment used. , oscilloscope and other instruments to check, determine the accident section and then gradually reduce the scope of the accident, until the accident point is found for elimination. It should also be mentioned that the waveform of the key parts must be carefully viewed and must not be swept away by the eyes.

5. Método básico de manutenção do forno de fusão por indução, 5. Transmissão de energia

In some cases of induction melting furnaces, the fault occurs not at one point but at multiple points or even one surface. Therefore, after a fault is found, it must not be rushed to transmit electricity. The drawings must be carefully studied to analyze the multiple possibilities of the fault until it can no longer be checked. .