අතරමැදි සංඛ්‍යාත උදුනේ දඟර මෝටාර්

අතරමැදි සංඛ්‍යාත උදුන coil mortar is also called coil mortar and coil coating. It has high strength, high density and high edge. It is a corundum mortar designed to protect the coil of coreless intermediate frequency furnace. The coil mortar is made of composite sand, alum, corundum sand, powdered organic powder as the matrix, and premixed with appropriate amount of composite additives, ceramic bonding agent, etc., and the design takes into account the fire resistance, feasibility, and operability. To well protect the intermediate frequency induction furnace coil and intermediate frequency power supply.

Coil paste is a coating material used on the inner surface of coreless inductor coils. It should be evenly applied to the inner surface of the coil with a thickness of about six millimeters. Used between the coils can play the role of edge. Add approximately 12%-14% of water to achieve uniformity of application. It is recommended that minor repairs should be carried out 8 hours before the furnace is built for air drying. Major repairs or painting of new coils should be done the day before the furnace is built.

අපේ සමාගම විසින් සකස් කරන ලද රේඛා මෝටාර් පහත සඳහන් වාසි ඇත:

1. Protect the induction coil: This product has good high temperature performance. Once molten metal penetrates into the furnace lining, it can protect the coil from molten metal dissolution in a short time; it supports the induction coil to prevent it from deforming during use and removal of the furnace lining. , Especially for the furnace body with ejection mechanism, it has the function of guiding and preventing the coil from being scratched.

2. It acts as an edge between the turns of the coil.

3. ඔබට නව දඟර යෙදීම හෝ දඟර අළුත්වැඩියා ද්‍රව්‍ය සෑදීම කළ හැකිය.

4. අධික තාප සන්නායකතාවය.

5. උදුන පැළඳීම සිදුවීම හා ව්‍යාප්තිය සීමා කළ හැකිය

6. Protection of intermediate frequency power supply: Coil mortar has a good edge. After the mortar is applied between the turns of the induction coil, it can prevent short-circuit or discharge between the coils and generate excessive impulse current to burn the thyristor and so on.

The coil glue has good viscosity and is very convenient to apply. The smooth surface formed on the coil can cushion the expansion and contraction of the working lining. In addition, the coil mortar can also prevent the leakage of molten metal and protect the coil from the breakdown of molten metal.