300KW medium frequency induction heating equipment

použitie

1. It is used for diathermy forging of round steel, bars and other workpieces with a diameter of less than 70, with an output of 750kg per hour.

2. The shaft can be quenched to shafts below Φ250mm.

3. The gear can be quenched to Φ550mm or less, the sleeve roller sprocket can be quenched to Φ900mm, and the gear with a modulus of 50 or less can be single-tooth quenched.

Application fields of 300KW medium frequency induction heating equipment:

1. Diathermic forging round steel bars with a diameter of less than 70mm by diathermic forging, with an output of 750kg per hour.

2. The shaft can be quenched to shafts below Φ250mm.

3. The gear can be quenched to Φ550mm or less, the sleeve roller sprocket can be quenched to Φ900mm, and the gear with a modulus of 50 or less can be single-tooth quenched.

4. Quenching of large machine tool rails.

5. The hardened layer meets the material requirements, and the hardening depth is 2-6mm.

Hlavná prednosť:

1. Prijať globálne obstarávanie zariadení a komponentov IGBT.

2. Prijmite vysokoúčinnú technológiu kombinovanej rezonancie.

3. Prijmite usporiadanie obvodu s nízkou indukčnosťou a rozsiahly digitálny obvod.

4. Prijať komplexnejšiu a vyspelejšiu technológiu ochrany.

Configuration standard:

1. One medium frequency induction heating equipment

2. A set of furnace

3. One automatic pneumatic feeder

4. Closed cooling tower