Steel rod induction heating furnace

The 250mm steel rod induction heating furnace is an induction heating furnace equipment for heating round steel in the diameter range of 200mm-270mm. It has the characteristics of good heat permeability, no black core, fast heating speed, energy saving and environmental protection. Take the heating of a 250mm diameter bar as an example, and introduce the basic parameters of the 250mm round steel heating equipment in detail for your reference.

1. The basic specifications of round steel:

Round steel billet heating specifications: Φ120×200mm, Φ210×340mm, Φ250×500mm

2. Material of round bar: alloy steel

3. Heating temperature of steel rod induction heating furnace: 1200℃

Fourth, the standards that the steel rod induction heating furnace meets

ZB46001-87 “Semiconductor Frequency Conversion Device for Induction Heating”

JB4086-85 “Technical Conditions of Electric Control Equipment for Intermediate Frequency Induction Heating”

GB1006.3-88 “Basic Technical Conditions of Electric Heating Equipment—Induction Heating Equipment”

GB5959.3-88 “Safety of Electric Heating Equipment—Special Requirements for Induction and Conductive Heating Equipment and Induction Melting”

Fourth, the power of the steel rod induction heating furnace:

The power of the whole set of steel rod induction heating furnace adopts two sets of heating power supplies, the heating power is 1500Kw+250Kw

5. Inductor configuration of steel rod induction heating furnace:

The length of the sensor is 6.0m+2.5m, 6mi is divided into 3 sections; each section is 2m in length

6. Design frequency of steel rod induction heating furnace: 1000HZ

Seven, steel rod induction heating furnace composition

1. Intermediate frequency power supply: one KGPS-1500KW/1000HZ

KGPS-250KW/500HZ one

2. Forging heating furnace: GTR-￠150; 210; 250 each set

3. A set of furnace body bracket

4. One set of flip-type V-shaped trough

5. One cylinder feeding

6. One fast discharging machine

7. A set of capacitor bank