Sebōpi se sirelletsang matla faeba SD3-4-13 selelekela se qaqileng

Litšobotsi tsa ts’ebetso ea ho boloka matla faeba ho hanyetsa sebōpi SD3-4-13:

■ Mohala oa mocheso o phahameng oa mocheso oa mocheso kapa silicone ea molamu o futhumatsang ke taba ea boikhethelo

■ Ho nepahala ho phahameng, phoso ke “0” mochesong o phahameng oa likhato tse 1000

■ Tlhahiso e kopaneng, ha ho hlokahale hore e kengoe, e ka sebelisoa ha e hokeloa phepelong ea motlakase

■ Sisteme ea taolo e sebelisa theknoloji ea LTDE, e nang le tšebetso e hlophisehang ea li-band tse 30, le ts’ireletso ea maemo a holimo ho feta habeli.

■ Boima ba eona bo bobebe ka 70% ho feta sebopi sa motlakase se tloaelehileng, ponahalo e nyane, boholo ba kamore ea ho sebetsa bo boholo, ‘me boholo bo lekanang ba kantle ke 50% e kholo ho feta sebopi sa moetlo oa motlakase o sebetsang.

Sebōpi sena sa polokelo ea fiber se bolokang matla (ceramic fiber muffle furnace) se rarolla mosebetsi o boima oa boitokisetso ba sebopi sa mantlha sa ho boloka matla a fiber se kang ho kenya, khokahano le ho etsa phoso. Bulela feela matla a ho sebetsa. Sebōpi se entsoe ka thepa e bobebe bo bobebe, ‘me lebelo la ho futhumatsa le makhetlo a mararo ho feta sebopi sa mantlha sa ho boloka matla a fiber (se fetolehang ka lebelo). Sisteme ea taolo e sebelisa theknoloji ea LTDE, taolo e iketsang ea bohlale, e nang le mananeo a likarolo tse 30, ho futhumatsa ha curve, mocheso o iketsang ka linako tsohle, ho koala ka boiketsetso, le ts’ebetso ea PID ho netefatsa mocheso o nepahetseng oa ntlha e itseng. Ke sebopi se loketseng mocheso o phahameng bakeng sa liunivesithi, litsi tsa lipatlisiso, likhoebo tsa indasteri le tsa merafo, le lilaboratori

Lintlha tsa SD3-4-13 ea motlakase e bolokang matla a ts’ireletso ea fiber:

Sebopeho sa sebopi le thepa

Lisebelisoa tsa likhetla tsa sebōpi: Lebokose le kantle le entsoe ka poleiti ea boemo bo holimo e batang, e alafiloeng ka letsoai la filimi ea phosphoric acid, mme e fafatsoa ka mocheso o phahameng, ‘me’ mala o moputsoa oa khomphutha;

Lisebelisoa tsa sebōpi: E entsoe ka mahlaseli a phahameng a mahlakore a tšeletseng, polokelo ea mocheso o tlase le boto ea setofo se nang le mabone a mangata, e hananang le serame le mocheso o potlakileng, mme e boloka matla ebile e sebetsa hantle;

Mokhoa oa ho kenya letsoho: mocheso oa mocheso oa moea;

Boema-kepe ba litekanyo tsa mocheso: The thermocouple e kena ho tsoa mokokotlong o kaholimo oa ‘mele oa sebopi;

Terminal: Setsi sa terata ea ho futhumatsa se karolong e ka tlase ea ‘mele oa sebopi;

Molaoli: e ka tlasa ‘mele oa sebopi, sistimi ea taolo e hahelletsoeng, terata ea matšeliso e hokahantsoeng le’ mele oa sebopi

Heating element: U e bōpehileng joaloka silicon carbide molamu;

Boima ba mochini o ka bang 91KG

Standard ambalaji: lehong lebokose

Litlhahiso tsa Sehlahiswa

Mocheso mefuta e fapaneng: 100 ~ 1300 ℃;

Tekanyo ea ho fetoha ha maemo: ± 1 ℃;

Hlahisa ho nepahala: 1 ℃;

Boholo ba sebōpi: 300 × 300 × 300 MM

Mefuta: 600 * 580 * 775MM

Sekhahla sa ho futhumatsa: ≤50 ° C / min; (e ka fetoloa ka mokhoa o ikhethileng ho lebelo leha e le lefe le tlase ho likhato tse 50 ka motsotso)

Matla a mochini: 4KW;

Mohloli oa matla: 220V, 50Hz

Sistimi ea taolo ea mocheso

Tekanyo ea mocheso: S index platinum rhodium-platinum thermocouple;

Sistimi ea taolo: LTDE seletsa se iketsetsang ka botlalo, PID phetoho, bonts’a ho nepahala 1 ℃

Lisebelisoa tse felletseng tsa lisebelisoa tsa motlakase: sebelisa li-contactors tsa brand, li-fan tse pholileng, li-relay tsa mmuso o tiileng;

Sistimi ea nako: nako ea ho futhumatsa e ka setoa, taolo ea nako ea mocheso nako le nako, ho koala hanghang ha nako ea mocheso e lula e fihlile;

Tšireletso ea mocheso o fetang oa mocheso: Sesebelisoa sa ts’ireletso se phahameng sa mocheso o phahameng, inshorense e habeli. ;

Mokhoa oa ts’ebetso: mocheso o feto-fetohang oa kamehla bakeng sa mefuta e felletseng, ts’ebetso e sa feleng; ts’ebetso ea lenaneo.

Ho Hlomelloa ka leseli la tekheniki le lisebelisoa

Litaelo tse sebetsang

Karete ea waranti

Likarolo tse kholo

Sesebelisoa sa taolo ea LTDE e ka hlophisoang

boemo bo tiileng lesokoana

Ho tsamaisoa ka hare

Thermocouple

Enjene e pholileng

shaped silicon carbide rod

Letoto le ts’oanang la sebōpi se bolokang matla a fiber (ceramic fiber muffle furnace) tafole ea tekanyetso ea tekheniki

lebitso	ea mohlala	Boholo ba Studio	Rated mocheso ℃	E lekantsoe matla (KW)	Palo ea li-volts	mantsoe
Sebōpi se sirelletsang matla faeba (sebōpi sa ceramic fiber muffle)	SD3-1.5-10	* * 165 120 105	1000 ° C	1.5	220V 50HZ
	SD3-2-12	* * 165 120 105	1200 ° C	2
	SD3-2-13	* * 165 120 105	1300 ° C	2		Khetla e habeli
	SD3-3-10	* * 300 200 150	1000 ° C	3
	SD3-3-11	* * 300 200 150	1100 ° C	3
	SD3-3-12	* * 300 200 150	1200 ° C	3
	SD3-3-13	* * 300 200 150	1300 ° C	3		Ho futhumala ha silicon carbide e bopehileng joaloka U khetla e habeli
	SD3-4-10	* * 300 300 300	1000 ° C	4
	SD3-4-12	* * 300 300 300	1200 ° C	4
	SD3-4-13	* * 300 300 300	1300 ° C	4		Ho futhumala ha silicon carbide e bopehileng joaloka U khetla e habeli
	SD3-5-10	* * 400 400 400	1000 ° C	5
	SD3-7.5-12	* * 400 400 400	1200 ° C	7.5	380V 50HZ	Ho futhumatsa mahlakore a mane lera tlase khetla e habeli
	SD3-6-13	* * 400 400 400	1300 ° C	6		Ho futhumala ha silicon carbide e bopehileng joaloka U khetla e habeli
	SD3-7.5-10D	* * 500 500 500	1000 ° C	7.5		Letlapa le ka tlase la sebopi le koahetsoeng ke ho futhumatsa ka mahlakoreng ‘ohle
	SD3-8-11	* * 500 500 500	1100 ° C	8		Ho futhumatsa mahlakore a mane lera tlase khetla e habeli
	SD3-4-16	* * 200 150 150	1600 ° C	4	220V 50HZ	Silicon e molybdenum futhumatsang molamu

Bareki ba rekang sebōpi sa motlakase se sirelletsang matla faeba SD3-2-12 ba kanna ba sebelisa lisebelisoa tse tšehetsang:

Litlelafo tse phahameng tsa mocheso
(2) 300MM matlao tsoana le sebopi
(3) 30ML tsoana le sebopi 20 likotoana / lebokose
(4) 600G / 0.1G tekano ea elektroniki
(5) 100G / 0.01G tekano ea elektroniki
(6) 100G / 0.001G tekano ea elektroniki
(7) 200G / 0.0001G tekano ea elektroniki
(8) Vertical blast omisa ontong DGG-9070A
(9) SD-CJ-1D e le ‘ngoe ea motho e le’ ngoe e hloekisang sebenche (phepelo ea moea e emeng)
(10) SD-CJ-2D habeli-motho o le mong-lehlakoreng le leng tlhoekiso workbench (paatsepama moea phepelo)
(11) SD-CJ-1F bencheng e le ‘ngoe e nang le mahlakore a mabeli e hloekileng (phepelo ea moea o emeng)
(12) PHS-25 (ho nepahala ha sesupi) ± 0.05PH)

PHS-3C (ho nepahala ha pontšo ea dijithale ± 0.01PH)

Sartorius balance le The hook e tlase e na le sebopeho sa RS232 se hahelletsoeng, se boima ba 220G, ‘me se nepile ka 1MG.

Bakeng sa teko ea tahlehelo ea thothetsang molelo: beha tekano ka ontong kapa seboping se phahameng sa mocheso, fanyeha sekhechana sa liteko ka ontong, ‘me u shebe ponahalo ea boima ba litekanyo ha sengoathoana sa liteko se besitsoe