Mokhoa oa ho khetha lisebelisoa tsa ho futhumatsa ka induction?

First, the heating depth and area selection:

The deeper the depth of the lisebelisoa tsa ho futhumatsa, the larger the area, and the overall heating will use induction heating equipment with high power and low frequency; the heating depth is relatively shallow and the area is small, and only local heating is used, then the heating depth is shallow, the area is small, and the local For heating, use induction heating equipment with low relative power and high frequency.

Second, the selection of the connection distance between the sensing component and the device:

If the connection wire required by the induction heating equipment is relatively long, then it must be connected with a water-cooled cable, and a device with a higher power should be selected when purchasing.

Choose the shape and size of the heated workpiece:

For large workpieces such as bars, equipment with high power and low frequency should be selected; while for small workpieces, pipes, plates, gears, etc., induction heating equipment with relatively low power and high frequency should be selected.

Khetho ea ts’ebetso:

For quenching and welding processes, you can choose equipment with low power and high frequency; for tempering and annealing, you need to choose equipment with higher power and lower frequency; for red punching, hot forging and smelting, you need to choose equipment with good diathermy effect and larger power. , the lower frequency.

5. Material selection of workpiece:

The melting point of the metal material is high, and the power of the induction heating equipment should be larger. If it is a material with a low melting point, a device with a lower power can be selected; the resistivity is small, and the power is larger, and the resistivity is larger. The power is smaller, etc. Wait.

Tšelela, khetho ea lebelo la ho futhumatsa:

The greater the power, the faster the heating speed and the lower the frequency.

Seven, continuous working time selection of equipment:

Continuous working time is long, relatively choose induction heating equipment with slightly larger power, on the contrary, choose equipment with relatively small power.