Ke litlhahlobo life tse lokelang ho etsoa pele o sebelisoa tšepe e pshatlang sebōpi?

E le hore sebōpi se qhibilihisang tšepe se sebelisoe hamolemo ha se sebetsa, hoa hlokahala ho:

(1) Use a temperature measuring gun to observe the temperature of the thyristor and the RC protection resistor and the working temperature of the voltage equalizing resistor. The temperature measurement time is divided into three stages: the first temperature measurement is when the metal melting furnace is running the first molten steel, about one-third of the power is turned on, and the temperature is measured about 5 to 10 minutes later. The second time was about when the molten steel was almost full. Then for the third time, the temperature was measured at the end of the smelting, which is today’s last furnace with full power. Of course, all the above 3 temperature measurements need to be recorded in order to find and solve problems in time.

(2) Sheba hore na li-screws tsa cable li hlephile kapa che letsatsi le leng le le leng.

(3) Hoa hlokahala ho netefatsa hore pompo ea metsi ea phepelo ea motlakase le pompo ea metsi a sebōpi li buloa letsatsi le leng le le leng pele ho qala mochine. Khatello ea metsi ke 1.5 ho 1.7 kg ka har’a khabinete ea matla le 1.5 ho 2 kg ka sebōping.

(4) Keep the furnace body clean and free of iron filings and metal objects near the water cables.