Bohlokoa ba ho potoloha ha metsi seboping sa tšepe se qhibilihisang

In most metal smelting furnaces, the furnace body and the power cabinet have two independent water systems, an internal circulation system, an external circulation system, internal closed-circuit deionized water, and include a water-to-water heat exchanger, rectification Silicon, reactors, filter capacitors, inverter silicon, and resonance capacitors are all connected to this system. Since the internal water system circulates in the DC high voltage, the internal cooling water will generate electric ions under the action of the pipeline DC high voltage. After a period of time, the concentration of electric ions will gradually increase. When the concentration of electric ions exceeds the required value, the high DC voltage will corrode the copper joints through the cooling water with high concentration of ions, resulting in the situation seen in the photo below. If the water connector corrodes and breaks during use of the power supply, the pressurized cooling water will spray out, causing major equipment accidents, and the cooling water with high concentration of electric ions will reduce the insulation of the system, which is more likely to cause damage to the thyristor Therefore, the conductivity of the cooling water should be checked regularly, and it must be less than 10us/cm. If the conductivity is greater than 100us/cm, replace the circulating cooling water in all power cabinets, and it is recommended to replace it every six months.

Ho na le bothata bo bong ts’ebelisong ea pholileng ea metsi e koetsoeng e lokelang ho tsotelloa. Sistimi ea ho futhumatsa metsi e lokela ho ba le sephahla sa ho qeta. Leha ho le joalo, ts’ebetsong ea ‘nete, lits’ebetso tse ngata tsa ho futhumatsa metsi ntle le valve ea ho qeta li kentsoe. Ha sebōpi se sa sebetse nako e telele, ho bonolo hore khase e kene kahare ea metsi. Ha sebōpi sa tšepe se qhibilihisang se qalisoa bocha, karolo e ‘ngoe ea khase e tla sala ho sekoe sa metsi le lebokoseng la metsi le pholileng la likarolo mme e ke ke ea lokolloa, ho baka ho hloleha ha karolo ena. Pholiso ea metsi a potolohang e etsa hore mocheso o be holimo haholo hore o ka chesa likarolo. Ka hona, sistimi ea ho futhumatsa metsi ntle le valve ea metsi e sa sebelisoe nako e telele, ‘me e ts’oaroa hape. Ts’oarello ea metsi ntlheng e phahameng ka ho fetisisa ea karohano ea metsi e tlameha ho lokolloa ho hula khase e setseng.