Kumaha milih alat-alat quenching frékuénsi luhur neuleu

1) Continuous working hours of equipment

The continuous working time is long, and relatively high-power induction heating equipment is selected.

2) The connection distance between the sensing component and the equipment

The connection is long, and even water-cooled cable connection is required, so relatively high-power induction heating equipment should be used.

3) Depth and area to be heated

If the heating depth is deep, the area is large, and the overall heating, the induction heating equipment with high power and low frequency should be selected; the heating depth is shallow, the area is small, and the local heating is selected. Induction heating equipment with relatively low power and high frequency should be selected.

4) Process requirements

Generally speaking, for processes such as quenching and welding, you can choose a lower power and a higher frequency; for annealing and tempering processes, choose a higher relative power and a lower frequency; red punching, hot forging, smelting, etc., need For a process with good diathermy effect, the power should be larger and the frequency should be lower.

5) The material of the workpiece

Diantara bahan logam, titik lebur luhur relatif badag, titik lebur handap relatif leutik; nu résistansi handap leuwih luhur, jeung résistansi luhur leuwih handap.

6) Required heating rate

If the heating speed is fast, the induction heating equipment with relatively large power and relatively high frequency should be selected.

7) The shape and size of the workpiece to be heated

Pikeun workpieces badag, bar, jeung bahan padet, make alat pemanasan induksi kalawan kakuatan rélatif luhur sarta frékuénsi low; pikeun workpieces leutik, tabung, pelat, gears, jsb, ngagunakeun parabot pemanasan induksi kalawan kakuatan rélatif low jeung frékuénsi luhur.

The above basic knowledge must be analyzed and applied comprehensively in order to use it well, skillfully, and freely.

This not only must be mastered by every professional and technical personnel of high-frequency quenching equipment, but also needs to be understood and mastered as much as possible by users and those who want to use it.