site logo

Detailed steps when using hydrogen as working gas in tube furnace

Detailed steps when using hydrogen as working gas in rörugn

①Anslut vätgaskretsen och kontrollera läckorna med tvålvatten vid varje skarv för att bekräfta att det inte finns någon gasläcka.

②Bekräfta att varje ventil är stängd.

③Turn the knob counterclockwise to open the hydrogen cylinder main valve, and turn the knob clockwise to slowly open the outlet pressure reducing valve to keep the outlet pressure at 0.1MPa.

④Turn on the power of the mechanical pump, open the outlet valve and the two valves on the gas path of the mechanical pump, and pump for 5 minutes.

⑤Stäng de två ventilerna på den mekaniska pumpens gasbana, stäng utloppsventilen och stäng av den mekaniska pumpen.

⑥Öppna den övre gasvägskontrollventilen moturs och se till att pilen pekar mot “öppet” läge.

⑦Adjust the flowmeter knob counterclockwise to make the reading at 20ml/min.

⑧Vrid vredet moturs för att öppna insugningsventilen tills barometern visar noll.

⑨Open the intake valve and open the red outlet valve on the hydrogen gas line.

⑩The heating of the atmosphere tube furnace can only be started after the hydrogen gas has been vented for ten minutes. Before heating, adjust the flow meter knob counterclockwise to make the bubbles in the Erlenmeyer flask appear at a rate of 2 bubbles per second.