Spline shaft quenching equipment

1. Vipengee vya bidhaa

1. Induction heating does not need to heat the workpiece as a whole, and can selectively heat a part of the workpiece, so as to achieve the goal of low power consumption, and the deformation of the workpiece is not obvious.

2. Kasi ya kupokanzwa ni haraka, ambayo inaweza kufanya workpiece ifikie joto linalohitajika kwa muda mfupi sana, hata ndani ya sekunde 1. Kama matokeo, kioksidishaji cha uso na utengano wa kazi ni kidogo, na sehemu nyingi za kazi hazihitaji ulinzi wa gesi.

3. Uso mgumu wa uso unaweza kubadilishwa na kudhibitiwa kwa kurekebisha masafa ya kufanya kazi na nguvu ya vifaa inavyohitajika. Kama matokeo, muundo wa martensite wa safu ngumu ni laini, na ugumu, nguvu na ugumu ni kubwa sana.

4. The workpiece after heat treatment by induction heating has a thicker toughness area under the surface hard layer, which has better compressive internal stress, which makes the workpiece more resistant to fatigue and breaking.

5. The heating equipment is easy to install on the production line, easy to realize mechanization and automation, easy to manage, and can effectively reduce transportation, save manpower, and improve production efficiency.

6. Mashine moja inaweza kutumika kwa madhumuni mengi. Inaweza kukamilisha michakato ya matibabu ya joto kama vile kuzima, kufunika, kupumua, kurekebisha, na kuzima na kukasirisha, pamoja na kulehemu, kuyeyuka, mkutano wa joto, kutenganisha mafuta, na kutengeneza joto.

7. Rahisi kutumia, rahisi kufanya kazi, na inaweza kuanza au kusimamishwa wakati wowote. Na hakuna haja ya kutangulia.

8. It can be operated manually, semi-automatically or fully automatically; it can work continuously for a long time, or it can be used at random when it is used. It is conducive to the use of the equipment during the low electricity price discount period.

9. High utilization rate of electric energy, environmental protection and energy saving, safety and reliability, and good working conditions for workers are advocated by the state.

2. Matumizi ya bidhaa

Kukomesha

1. Kuzima gia anuwai, mifuko, na shafts;

2. Kuzima kwa shafts kadhaa za nusu, chemchem za majani, uma za kuhama, valves, mikono ya rocker, pini za mpira na vifaa vingine vya gari na pikipiki.

3. Kuzima sehemu kadhaa za injini za mwako wa ndani na sehemu za kupungua kwa uso;

4. Kuzima matibabu ya reli za zana za mashine kwenye tasnia ya zana za mashine (lathes, mashine za kusaga, mipango, mashine za kuchomwa, nk).

5. Kuzima zana anuwai za mikono kama vile koleo, visu, mkasi, shoka, nyundo, nk.

Kughushi Diathermic

1. Kichwa cha moto cha sehemu anuwai za kawaida, vifungo, vifungo anuwai vya nguvu na karanga;

2. Utengenezaji wa baa na kipenyo cha chini ya 800mm;

3. Kichwa cha moto na kutembeza moto kwa sehemu za mitambo, vifaa vya vifaa, na kuchimba visima sawa.

Kulehemu

1. Kulehemu kwa vipande anuwai vya kuchimba almasi;

2. Welding of various hard alloy blades and saw blades;

3. Kulehemu kwa tar mbalimbali, biti za kuchimba, mabomba ya kuchimba visima, bits za kuchimba makaa ya mawe, bits za kuchimba hewa na vifaa vingine vya madini;

annealing

1. Vifaa anuwai vya kupokanzwa kwa sauti kubwa au matibabu ya kukomesha ya ndani

2. Kuongeza matibabu ya bidhaa anuwai ya chuma cha pua

3. Heating annealing and swelling of metal materials

nyingine

1. Inapokanzwa mipako ya mabomba ya alumini-plastiki, nyaya na waya;

2. Mihuri ya karatasi ya Aluminium inayotumiwa katika tasnia ya chakula, vinywaji, na dawa

3. Kulehemu kwa mapambo ya dhahabu na fedha

4. Utengenezaji wa chuma wa thamani: kuyeyusha dhahabu, fedha, shaba, n.k.

This product is suitable for the heating and quenching heat treatment process of various auto parts, motorcycles, engineering machinery, wind power, machinery factories, tool factories and other parts.