How to realize automatic feeding of кӯраи гармидиҳӣ?

1. Continuous feeding device for medium frequency induction heating furnace for round steel and square billet

The continuous feeding device of the intermediate frequency induction heating furnace is generally used for rolling or quenching and tempering after heating of round steel and billet. The length of the bar is between 6m and 12m. It is composed of feeding nip roll, intermediate nip roll, discharge nip roll, frequency conversion device and console, etc., which can ensure that long bars continuously enter the induction heating furnace for heating at the speed required by the process, ensure the heating temperature and temperature uniformity, and meet the requirements of induction heating. Production requirements for heating furnaces.

2. Induction heating furnace for short bars ‍Automatic feeding and feeding device

This induction heating furnace is generally designed and manufactured for the feeding and feeding of short bars. The length of the bar is less than 500mm. , PLC control mechanism and hydraulic or pneumatic system, etc., are automatically fed into the inductor for heating according to the heating beat of the induction heating furnace, and it is also the mainstream feeding and feeding equipment for short bars at present.

3. Feeding and feeding device for intermediate frequency furnace for large diameter bars

Bars with a diameter of more than 100mm and a length of more than 250mm are generally fed by this induction heating furnace. The bar material enters the chain feeder from the ground and is lifted to the center height of the sensor, and then the bar material is turned into the V-shaped groove by the turning mechanism. The hydraulic system pushes the oil cylinder to push the bar material into the sensor according to the rhythm of the induction heating furnace. Heating to realize automatic heating of induction heating furnace.

4. Induction heating furnace for flat material ‍‍Feeding and feeding device

This induction heating furnace feeding device is for the feeding device whose bar diameter is smaller than the bar length. It is composed of a pusher mechanism and a pneumatic system to ensure that the flat material enters the inductor at a certain angle for heating, which meets the heating requirements of the induction heating furnace.

5. Induction heating furnace ‍Simple feeding device

This simple feeding device for induction heating furnace adopts manual feeding and cylinder pushing, and is composed of a feeding platform, a turning mechanism, a v-groove, a rhythm controller and a cylinder pushing system. The rhythm controller controls the action of the cylinder according to the set heating rhythm to complete the heating process required by the intermediate frequency furnace.