Features of Steel Rod Heating Intermediate Frequency Furnace

Features of steel bar heating intermediate frequency furnace:

1. The induction coil of the steel bar heating intermediate frequency furnace is easy to disassemble and assemble and can be replaced at any time, and each set of our intermediate frequency induction heating equipment is generally equipped with an induction coil, which can basically meet your different heating needs for the workpiece.

2. The heating effect of the steel bar heating medium frequency furnace is relatively good, especially suitable for the through heat treatment of metal tools, standard parts, square steel, round steel, bars, etc.

3. When the steel bar heating intermediate frequency furnace is diathermying the bar material, it saves about 30%~40% of electricity compared with the previous old-fashioned electronic tube heating equipment, which greatly saves the electricity bill. You can use the saved electricity bill in a short period of time to buy new ones. equipment to speed up the flow of funds.

4. When the steel bar heating intermediate frequency furnace is diathermying the bar material, it is only necessary to put the bar material into the induction coil of the electric induction steel bar heating furnace, turn on the power, and press the start button, the coil will heat up rapidly, and the sensor The bar stock inside can be heated to the target temperature.

5. The whole process of heating the intermediate frequency furnace for steel rod heating is safe and pollution-free due to the cooling circulation system that comes with the steel rod heating furnace, and no industrial waste is generated, and the temperature of the machine body is always constant, which will not damage the intermediate frequency induction heating equipment. It reduces the environment of the previous work workshop and enhances the company’s image.

6. The steel bar heating intermediate frequency furnace has a complete equipment protection system, which can protect against any failures that may occur during the operation process. When there are abnormal phenomena such as overvoltage, overcurrent, overheating, and lack of water, the warning light will immediately Lights up, power off.