Features of round steel quenching and tempering line

Features of round steel quenching and tempering line:

1. Round steel quenching and tempering line feeding conveyor roller table: it is installed at the feeding end of the sensor, it is powered by a variable frequency speed regulation motor, its running speed is infinitely adjustable, and its running speed is slightly faster than heating conveyor Roller.

2. Heating conveyor roller table of round steel quenching and tempering line: it is a conveyor roller table specially used to adjust the running speed of the workpiece when it is heated. to adjust the heating rate. Since the V-shaped roller of the heated roller table is in the high temperature working area, a hole is punched in the center of the roller shaft and cooling water is passed to cool the roller.

3. Conveying roller table for rapid drawing of round steel quenching and tempering line: The roller table is installed at the discharge end, and is powered by another motor, and its running speed is much faster than the conveying roller table for heating. When the workpiece is quenched, the roller motor starts immediately, driving the workpiece to leave the quenching area quickly.

4. Round steel quenching and tempering line unloading device: When the workpiece leaves the quenching working area and reaches the end of the roller table, the sensor installed at the end of the roller table will issue a “unloading” command, so the cylinder under the roller table will eject the workpiece. The roller table and along the side slide rails roll down to the finished product stacking area.

5. The workpiece treated by the round steel quenching and tempering line will not produce decarbonization, no deformation, no cracks, and strong toughness.

6. The intermediate frequency power control system of the round steel quenching and tempering line is reliable, energy-saving, low-cost, high-efficiency, and the water pipeline is made of 304 non-magnetic stainless steel

7. Both ends of the furnace body of the round steel quenching and tempering line are sealed with red copper plates, and the base of the furnace body is made of high-strength aluminum alloy, which is durable and anti-corrosion.

8. Siemens PLC automatic control system, high production efficiency.

9. When the induction heating furnace works without load, the system will reduce to a lower power. When the workpiece enters the induction heating furnace, the device will be added to the normal work, which can greatly reduce the power consumption.

10. The infrared thermometer of the round steel quenching and tempering line controls the temperature, and the non-contact infrared thermometer can measure the temperature of the billet at the outlet end.