Precautions for installing 工業冷水機

1. During installation, please check whether the industrial chiller is damaged, and choose a suitable place for installation and future maintenance.

2. The installation site of the unit must be the floor, installation pad or foundation, its level is within 6.4mm, and can bear the operating weight of the unit.

3. The unit should be placed in a computer room with a room temperature of 4.4-43.3°C, and there should be enough space around and above the unit for routine maintenance.

4. At one end of the unit, a draining space for cleaning the condenser tube bundle should be reserved, and a door opening or other suitable openings can also be used.

5. When the environment around the water source and cooling tower is bad, the chilled water and cooling water circuits must be installed with Y-type filters and cleaned regularly. An automatic exhaust valve must be installed at the highest point of the closed chilled water system, and a drain joint must be installed at the lowest point of the system to drain the system. use.

6. Select the matching cooling tower according to the cooling capacity of the industrial chiller.

7. After the chilled water pipeline system passes the leak test, wrap the insulation layer to avoid the loss of cooling capacity and the dripping of the pipeline.