Teflon board for stairs

Detailed introduction of the construction process of polyethylene PTFE board for stairs:

1. Zinapoyaning sirtini tozalang, o’tkir zarrachalarga yo’l qo’yilmaydi.

2. Plastmassa plyonka qo’ying.

3. Zinapoyalarni yotqizish uchun polietilen PTFE taxtasi.

4. Boltlarni mahkamlash (eslatma: oraliq, chekka).

5. Perform pouring.

5mm Polyethylene PTFE Board for Stair Step Base (Wang’s)

Design thickness of polyethylene PTFE board for staircase construction; 5mm thickness

Zinapoyalar uchun PTFE taxtasining umumiy xususiyatlari: 1350*280*5, 1450*280*5, 1500*280*5, 1700*280*5, 1800*280*5, 1900*280*5, 1300*300*5, 1400 *300 *5 va boshqa texnik xususiyatlarni sozlash mumkin.

Product performance introduction and its irreplaceable role in engineering: Polyethylene tetrafluoroethylene is the material with the smallest friction coefficient among known solids (smaller than ice). At the same time, the pressure of polyethylene tetrafluoride board is greater than 30MPa when it is made. The tensile strength of the product itself is greater than 15MPa (equivalent to the strength of C15 concrete in the building) and the elongation rate is greater than 150%. Choosing it at this part is fancy two points: excellent sliding properties and reliable strength and elongation.

Polytetrafluoroethylene is the material with the smallest coefficient of friction in the known solids (smaller than ice). At the same time, the pressure of the PTFE sheet during production is greater than 30MPa, and the tensile strength of the product itself is greater than 15MPa (equivalent to The strength of C15 concrete) elongation rate is greater than 150%. Choosing it in this part is fancy two points: excellent sliding property and reliable strength and elongation rate.