Imithetho yokuSebenza yobuGcisa ye CNC Ukucima Machine Tool

1. Injongo

Ukulinganisa ukuziphatha kobugcisa bokusebenza kwabaqhubi besixhobo somshini wokucima, ukuphucula inqanaba lokusebenza kobugcisa; ukomeleza imveliso kunye nolawulo lwezixhobo, ukuthintela ukhuseleko kunye neengozi zezixhobo, kunye nokuphucula ukusebenza kakuhle kwezixhobo zokusebenza.

2. Ubungakanani besicelo

Ifanelekile kwi-DLX-1050 CNC yokucima umatshini wokusebenza.

3. Iinkqubo zokusebenza

3.1 Ngaphambi kokuba uqale

3.1.1 Tshekisha ukuba indawo nganye yesixhobo somatshini wokucima iqhelekile, uze uqale umatshini emva kokuqinisekisa ukuba uqhelekile.

3.1.2 Vula inkqubo yokulawula umbane wokufudumeza okuphakamileyo kwaye uqinisekise ukuba zonke iiparamitha zesixhobo zikuluhlu oluqhelekileyo.

3.1.3 Vula iswitshi yamandla esixhobo somatshini, bhala inkqubo yokusebenza ngokuchanekileyo ngokweemfuno zemanyuwali, kwaye uqhube inkqubo emva naphambili ngaphandle komthwalo. Emva kokuqinisekisa ukuba inkqubo nganye isebenza ngokuqhelekileyo, isixhobo somatshini sikwimo yokulinda.

3.2 Umsebenzi wokucima

3.2.1 Vula iswitshi yomsebenzi wesixhobo somatshini kwaye ubeke iswitshi yokudlulisa kwindawo yencwadi.

3.2.2 Hambisa i-workpiece kwisixhobo somatshini nge-crane (i-workpiece enkulu) okanye ngesandla (i-workpiece encinci) kwaye ubambe i-workpiece. I-crane kufuneka ibe kude nomatshini xa usebenza.

3.2.3 Guqula isixhobo somatshini kwimodi ezenzekelayo, vula iqhosha lokusebenza lesixhobo somatshini, kwaye wenze inkqubo yokucima ngokuzenzekelayo.

3.2.4 Emva kokuba inkqubo yokucima ngokuzenzekelayo igqityiwe kwaye i-workpiece ipholile ngokupheleleyo, phinda utshintshe utshintsho

Kwisikhundla semanyuwali, cima ukunikezelwa kwamandla kwenkqubo yokufudumala, uze ususe i-workpiece ecinyiweyo ngesandla okanye nge-crane.

3.2.5 Cima amandla esixhobo somatshini kwaye ucoce isixhobo somatshini.

4. Ukugcinwa kwesixhobo somatshini

4. 1 Jonga kwaye ucoce umbhobho wamanzi okupholisa, itanki yamanzi kunye nezinye iindawo rhoqo ngeveki, kwaye uqaphele ukujonga ukuba kukho ukuvuza kwamanzi.

4. 2 Xa umsebenzi wokucima ugqityiwe kwaye ungasasebenzi, cima itanki yamanzi yesixhobo somatshini kwaye womise izixhobo kunye nezinye iindawo.

4.3 Thambisa onke amalungu ajikelezayo rhoqo kwishifti, kwaye ujonge ukugquma kweesekethe zombane yonke imihla.