site logo

Energy-saving fiber resistance furnace SD3-7.5-10D detailed introduction

Energy-saving fiber resistance furnace SD3-7.5-10D detailed introduction

Performance characteristics of energy-saving fiber resistance furnace SD3-7.5-10D:

■Large space, low power, energy saving and high efficiency

■High accuracy, the error is “0” at a high temperature of 1000 degrees

■Four sides heating, lining furnace bottom plate, integrated production, no need to install, it can be used when connected to the power supply.

■The control system adopts LTDE technology, with 30-band programmable function, and two-level over-temperature protection.

■The weight is 70% lighter than the traditional electric furnace, the appearance is small, the working room size is large, and the same external size is 50% larger than the traditional electric furnace working size

This energy-saving fiber resistance furnace (ceramic fiber muffle furnace) uses a ceramic fiber liner, high temperature heating wire to generate heat, energy saving and high efficiency. Three times the energy-saving fiber resistance furnace (speed adjustable). The integrated production solves the tedious preparation work of the original energy-saving fiber resistance furnace, installation, connection, and debugging. Just turn on the power to work. The control system adopts LTDE technology, automatic intelligent control, with 30-segment programming, curve heating, automatic constant temperature, automatic shutdown, and PID function to ensure the correct temperature of a certain point. It is an ideal high-temperature furnace for universities, research institutes, industrial and mining enterprises, and laboratories;

Details of SD3-7.5-10D energy-saving fiber resistance furnace:

Furnace structure and materials

Furnace shell material: The outer box shell is made of high-quality cold plate, treated with phosphoric acid film salt, and sprayed at high temperature, and the color is computer gray;

Furnace material: It is made of six-sided high-radiation, low-heat storage and ultra-light fiber stove board, which is resistant to rapid cold and heat, and is energy-saving and efficient;

Insulation method: air heat dissipation;

Temperature measurement port: The thermocouple enters from the upper back of the furnace body;

Terminal: The heating wire terminal is located at the lower back of the furnace body;

Controller: located under the furnace body, built-in control system, compensation wire connected to the furnace body

Heating element: high temperature resistance wire;

Whole machine weight: about 216KG

Standard packaging: wooden box

Product Specifications

Temperature range: 100 ~ 1000℃;

Fluctuation degree: ±1℃;

Display accuracy: 1℃;

Furnace size: 500×500×500 MM

Dimensions: 830×920×1120 MM

Heating rate: ≤30°C/min; (can be arbitrarily adjusted to any speed lower than 30 degrees per minute)

Whole machine power: 7.5KW;

Power source: 380V, 50Hz

Temperature control system

Temperature measurement: K-indexed nickel-chromium-nickel-silicon thermocouple;

Control system: LTDE fully automatic programmable instrument, PID adjustment, display accuracy 1℃

Complete sets of electrical appliances: use brand contactors, cooling fans, solid state relays;

Time system: heating time can be set, constant temperature time control, automatic shutdown when constant temperature time is reached;

Over-temperature protection: Built-in secondary over-temperature protection device, double insurance. ;

Operation mode: adjustable constant temperature for full range, constant operation; program operation.

Equipped with technical information and accessories

Operating Instructions

warranty card

Main components

LTDE programmable control instrument

solid state relay

Intermediate relay

Thermocouple

Cooling motor

High temperature heating wire