Induction melting furnace for anode steel claw

Anode steel claws for electrolytic aluminum are also called electrolytic claws. There are parallel three claws, four claws, three-dimensional four claws, six claws, eight claws, and double anode steel claws.

The most advanced complete set of equipment for the production of anode steel claws-induction melting furnace, lost foam casting production line, the types of steel claws are two claws, three claws, four claws, six claws, and eight claws.

Equipped with physical and chemical measurement and rapid analysis laboratory in front of the furnace, the induction melting furnace is used for refining with rare earths to ensure that the gas content and impurities in the molten steel are reduced to a minimum, so as to obtain better electrical conductivity. Using advanced dry sand solid negative pressure (lost foam) green casting process, the anode steel claws are qualified in size, smooth in surface, tight internal organization, and free of defects such as blisters, slag inclusions, cracks, pores, shrinkage and porosity.

The large-tonnage automatic reverberatory furnace is used for aging treatment, and the trolley-type shot blasting machine is used for surface strengthening treatment, especially the metal luster of the steel claws are all exposed. The double-sided combined special milling machine is used for mechanical processing, with high processing accuracy and good quality.