Method of cleaning air-cooled chiller:

First of all, we must know the part to be cleaned.

Cleaning air-cooled chillers is not for compressors, but condensers, evaporators, pipes, water towers, fans, pumps, valves, pipe connections, etc.

Talking about the cleaning method and cycle of air-cooled chillers

Knowing the area to be cleaned helps to have a clearer goal when cleaning, instead of wasting unnecessary time.

Secondly, it is necessary to know which parts are not needed and cannot be cleaned.

Some parts of the air-cooled chiller do not need to be cleaned, and random cleaning will also cause the air-cooled chiller to fail to operate normally, such as electrical components and compressors.

Furthermore, you need to use a suitable cleaning agent.

The air-cooled chiller can be cleaned with special detergents and cleaning agents, or it can be configured by yourself, but acidic refrigerants cannot be used to clean the parts of the air-cooled chiller. For some stubborn scales and dirt, it can be used Special cleaning agents for special descaling carry out special descaling.

For the removal and cleaning of sphagnum moss, etc., special preparations for removing and inhibiting sphagnum moss can be used, and the surrounding environment is ensured to prevent foreign matter from entering the cooling water system.

The cleaning cycle depends on the frequency of use of the air-cooled chiller and the products produced by the company. Generally speaking, the condenser, evaporator and pipes are cleaned once every 3 months, while the cold water tower is cleaned. , It should be once a month.

It should be noted that the ambient temperature and water quality also have a great impact on the cleaning of the air-cooled chiller. The higher the ambient temperature, the load of the air-cooled chiller may be relatively high, and the cleaning frequency of the entire system will also become more frequent. high.

Water quality can also determine the cleaning cycle. In areas with poor water quality, cleaning should be more frequent, and the possibility of condenser and evaporator fouling is also greater.

In addition to scale, air-cooled chillers may also have rust. The scale-removing agent and the rust-removing agent are not the same. The corresponding agent should be selected according to the actual situation to remove scale and rust.