site logo

Safety instructions for sucker rod quenching and tempering production line

Safety instructions for sucker rod quenching and tempering production line

1. Keep all rotating parts well lubricated, and oil must be injected once per shift;

2. The grounding wires should be checked frequently to keep the grounding well;

3. Frequently check whether the fastening bolts are loose;

4. Check the oil volume of the oil tank, and replenish it in time when it is lower than the liquid level;

5. Check the high-pressure hose frequently, and replace it in time if it is damaged;

6. The hydraulic oil should be kept clean and replaced regularly. The oil tank and filter must be cleaned every time the oil is changed;

7. The standby pump of the water supply system should be exchanged regularly to avoid rusting if it is not used for a long time;

8. Identify and train full-time operators, and those who have not been trained are not allowed to operate;

9. When the cooling water pressure and water temperature exceed the setting values, the malfunction must be eliminated before the operation can continue.

10. Protection against electric shock

a. The protection shall comply with the relevant regulations in GB J65-83 “Grounding Design Code for Industrial and Civil Power Installations”;

b. For other protection, operators should wear personal protective equipment such as insulating gloves, insulating shoes, protective caps and goggles, and keep them away from moisture and moisture to prevent electric shock accidents.

c. When overhauling the power supply, capacitor cabinet and furnace, the power supply should be cut off and live working is prohibited.