Precautions for the use of water-cooled chillers with water as the heat exchange medium

The first is the cleanliness of the water. The more impurities in the water, the lower the heat exchange effect. The cooling water should be replaced regularly, or clean water quality agents should be put in. In addition, attention should be paid to whether the water source is qualified.

The second is the flow of water. The more water, the better the heat exchange effect. However, the flow of water is not only determined by a certain aspect. The flow of cooling water is related to the total amount of cooling water and the diameter of the cooling water pipe. , The cooling water pump, whether the water pipe is blocked, the diameter of the condenser, etc. are of great importance.

However, it is undeniable that the flow of water does have a very large impact on the cooling and heat dissipation effects of the water-cooled chiller. In this way, the flow of cooling water must be sufficient and must meet the actual needs of the water-cooled chiller. Row.

The third is the water pressure. The water pressure is determined by the head and pressure of the pump. If the water pressure is not enough, the water flow will be insufficient. It can be said that the flow is proportional to the pressure. If the water pressure is too low, the flow is insufficient. If the pressure is too high, it may cause problems such as bursting of the cooling water pipe of the chiller.